Skyworks offers a series of high IP3, 1.45 to 5.0 GHz, 0 to 5 V, voltage-controlled variable attenuators for repeater, wireless backhaul, and wireless infrastructure base station applications. The SKY12232-21 and SKY12235-11 are optimized for broad market wireless systems including military communication transceivers, S-Band radar, and VSAT.
Ensuring The Co-Existence Of IEEE 802.15.4-Based Systems At 2.4 GHz By NXP Semiconductors
This document aims to highlight the issues affecting the co-existence of IEEE 802.15.4-based systems in the presence of interference. The measures employed by the 802.15.4 standard to ensure reliable co-existence are outlined. The practical performance of an IEEE 802.15.4-based system is established with reference to supporting empirical and simulated data. Finally, guidelines are provided for installing sensor networks in either a planned or an unplanned RF environment.
Spotlight On Wireless Technology
Digital Oscilloscope The RTE series of digital oscilloscopes can be used in embedded design development, for general debugging purposes, and for power electronics analysis. Several different models are available with variations in bandwidth and number of channels.
Rohde & Schwarz | CTIA Booth 4043
Low PIM Fixed Attenuator JFW’s 50FLP-XXX-100 has an operating temperature range of -55°C to +100°C. It has a peak power of 1000 watts (1 microsecond pulse) and weighs 8.5 lbs. Like other attenuators, it’s ideal for applications involving signal conditioning and level control.
JFW Industries | CTIA Booth 4242
Multicoaxial Board Connector The MXP40 series of multicoaxial board connectors covers up to 40 Gbps/40 GHz. A lower cost version covers up to 18 Gbps/18GHz. Both are ideal for high-speed digital testing.
HUBER+SUHNER | CTIA Booth 2232
Vector Network Analyzer Anritsu’s ME7838E is a vector network analyzer for high-speed, on-wafer, and device characterization applications. It covers the 70 kHz to 110 GHz range and is available in a standard setup for in a millimeter-wave waveguide system.
Anritsu Company | CTIA Booth 3041
Wireless Connectivity Solutions Skyworks' Wi-Fi and Bluetooth connectivity solutions include high performance front end modules (FEMs); power amplifiers (PAs); low-noise amplifiers (LNAs); step down converters; SPDT, SP3T and DPDT switches; and discrete PIN, Schottky and varactor diodes.
This application note shows how FEKO electromagnetic simulation software uses full wave formulations to model currents on metallic surfaces, enabling accurate simulations of coupling, near fields, far fields, radiation patterns, current distributions, impedances, S-parameters, and more.
The VGLA20RPDC GPS variable gain line amplifier is a one-input, one-output device featuring a variable gain block with 25 dB of dynamic range. The frequency response covers the GPS L1 and L2 bands with excellent flatness throughout most of the attenuation range.
DLI’s engineers select from numerous filter topologies to solve your frequency management problem. They have expanded capability beyond band pass designs to include notch filters, low pass and high pass filters, and band stop filters.
The first CTIA super mobile show, CTIA 2014, will take place Sept. 9, 10, and 11 at the Sands Expo Convention Center in Las Vegas, Nevada. CTIA 2014 will take the best of its CTIA Show that’s focused on technology and consumer electronics with MobileCON and its emphasis on mobile IT solutions to offer attendees, exhibitors, and speakers with specialized opportunities so that all of the companies that compose the wireless ecosystem can network and conduct business with the right people.