Dow-Key Microwave new Reliant Switch™ is a 1x6 bidirectional 5-million cycles coaxial switch with an operating frequency from DC to 26.5 GHz, which covers the typical 6-GHz test range and beyond for high-speed testing. This switch is designed with a high isolation of 100 dB (up to 4 GHz) to maintain RF consistency between port-to-port testing. Moreover, the switch can sustain a guaranteed insertion loss repeatability of 0.03 dB across the entire frequency band.
Meeting The Requirements For Voice Over LTE (VoLTE) By Anritsu Company
The motivation for the deployment of 3GPP Long-term Evolution (LTE) mobile broadband technology is simple: All things considered, LTE delivers to carriers the lowest cost-per-transported bit. That said, the adage that "voice pays the bills" still applies: Though in decline, carriers continue to derive the bulk of their revenues from voice and integrated messaging services.
Spotlight On Test And Measurement
500-Watts CW Solid State Amplifier Datasheet This solid state amplifier covers the 80-MHz to 1000-MHz frequency range and uses push-pull circuitry in its higher power stages in order to lower distortion and improve stability. It’s particularly well suited for applications that require an amplifier with high gain and instantaneous bandwidth.
Vector Network Analyzers Datasheet Anritsu’s MS4640B vector network analyzers are a part of the VectorStar family, and provide the highest overall performance on a modern analyzer platform. They cover the 70-kHz to 70-GHz frequency range and offer 2.5-ns pulse resolution with a 100-dB dynamic range.
Electromechanical Switch Matrices Brochure Dow-Key understands the need of switching between more complext test setups may be required. Therefore, our CB-series crossbar matrices are an excellent choice that allows the engineer to test multiple UUT without having to connect and disconnect them from the test setup. A crossbar matrix allows the user to switch an input signal to any output port at a time.
Spherical Dipole Antenna Datasheet An optical fiber cable connects this NTT antenna's element to the measuring instrument. An O/E or E/O converter and battery are incorporated in the spherical antenna's housing. There are two variants of this antenna, a reception type and a radiating type.
20- To 1000-MHz, 1-kW RF Amplifier System Datasheet Empower RF’s BBS2E3KUT (SKU 2162) is a 1-kW RF amplifier in a 5U chassis that covers the 20- to 1000-MHz frequency range. It’s well-suited for octave bandwidth high-power CW, modulated, and pulse applications. This amplifier is approximately 75 percent smaller than competitive models, but offers 1-kW RF performance over the full bandwidth.
Wideband Power Sensor Datasheet The Bird Wideband Power Sensor (WPS) is a true handheld product; you can hold the sensor in one hand and comfortably operate the meter in the other. Operation couldn't be easier, simply connect the sensor in-line, connect the sensor to the meter, and you can access a host of measurements in moments with our intuitive, menu-driven interface.
The TM series "RF Orange" cable is a cost-effective solution for numerous production or general-purpose test applications. The GrooveTube technology offers excellent phase and amplitude stability with flexure.
The 60-750/751 is an LXI Microwave Switching platform controlled through an LXI compliant Ethernet connection. The matrix is available in a variety of configurations and frequencies up to 20 GHz and features a “Loop Through” option to create even larger matrices.
TRM Microwave offers 2-Way to 24-Way power dividers covering the DC to 26.5 GHz range. These power dividers are used in applications involving test and measurement, aerospace, SATCOM, security and surveillance, defense, medical, and avionics.
The R&S ESRP is an EMI test receiver and signal/spectrum analyzer, all in one box. It’s been designed to measure EMI in the 10 Hz to 7 GHz frequency range, and does so using conventional stepped frequency scanning or FFT-based time domain scanning.
During the 50th Annual AOC International Symposium and Convention, October 27-30 in Washington, D.C., dB Control will be recognized for its innovation and contributions to the electronic warfare (EW) industry.
A new set of geometry manipulation tools have been developed for FEKO Suite 6.3. These tools, available in CADFEKO, are dedicated to the repair of a range of CAD geometry problems. It prepares the fault-containing CAD model for FEKO analysis by reducing complexity and faults in the model. The repair-part and hole-filling tools are some of the highlights that will be demonstrated. There is no cost to register for the webinar.