Product/Service

Jitter Attenuators

Source: CTS Electronic Components

These Jitter Attenuators offer a completely integrated clock/PLL timing solution for synchronization, clock and data recovery, and jitter attenuation in SONET/SDH/ATM network elements. Various models are available in LVPECL, SINE, or CMOS with multiple selectable inputs and up to four outputs up to 1.0GHz.

These Jitter Attenuators offer a completely integrated clock/PLL timing solution for synchronization, clock and data recovery, and jitter attenuation in SONET/SDH/ATM network elements. Various models are available in LVPECL, SINE, or CMOS with multiple selectable inputs and up to four outputs up to 1.0GHz. Jitter measured over the OC-48 bandwidth (RMS 12KHz to 20MHz) is less than 0.2ps. CTS Valpey Jitter Attenuators exceed the requirements for Telcordia GR-1244-CORE, GR-253-CORE, ITU-T G.813, and G.8261.

Click on product shot to view data sheet.

SERIES

 OUTPUT FIN FOUT DESCRIPTION

VFJA905 Jitter Attenuator
19.5 x 15.5 mm

LVCMOS 2.5MHz, 25MHz or 125MHz 25MHz
  • Free Run Mode
  • Dual Outputs
  • <0.2ps Jitter RMS
  • RoHS 6/6

 

VFJA910 Jitter Attenuator
15.0 x 13.0 mm

LVCMOS 25MHz 25MHz
  • Free Run Mode
  • Dual Outputs
  • <0.2ps Jitter RMS
  • RoHS 6/6

 

VFJA911 Jitter Attenuator
15.0 x 13.0 mm

LVPECL 25MHz 25MHz
  • Free Run Mode
  • No external components required
  • <0.2ps Jitter RMS
  • RoHS 6/6

 

VFJA915 Jitter Attenuator
19.5 x 15.5 mm

LVCMOS 2.5MHz, 25MHz or 125MHz 25MHz
  • Free Run Mode
  • -143dBc/Hz @ 1KHz
  • <0.2ps Jitter RMS
  • RoHS 6/6

 

VFJA430 Jitter Attenuator
19.5 x 15.5 mm

LVCMOS 8KHz - 200MHz 10MHz - 200MHz
  • 3 Selectable Inputs
  • Free Run Mode
  • <0.2ps Jitter RMS
  • RoHS 6/6

 

VFJA432 Jitter Attenuator
19.5 x 15.5 mm

CMOS 8KHz - 200MHz 10MHz - 200MHz
  • 4 Selectable Inputs
  • Dual Outputs
  • <0.18ps Jitter RMS
  • RoHS 6/6

 

VFJA400 Jitter Attenuator
19.5 x 15.5 mm

LVPECL 8KHz - 200MHz 10MHz - 200MHz
  • 4 Selectable Inputs
  • 1 Output Frequency
  • <0.2ps Jitter RMS
  • RoHS 6/6

 

VFJA401 Jitter Attenuator
19.5 x 15.5 mm

LVPECL 200MHz - 800MHz 10MHz - 200MHz
  • 4 Selectable Inputs
  • 1 Output Frequency
  • <0.2ps Jitter RMS
  • RoHS 6/6

 

VFJA434 Jitter Attenuator
19.5 x 15.5 mm

CMOS 8KHz - 200MHz 10MHz - 200MHz
  • 4 Selectable Inputs
  • Quad Outputs
  • <0.18ps Jitter RMS
  • RoHS 6/6

 

VFJA402 Jitter Attenuator
19.5 x 15.5 mm

LVPECL 8KHz - 200MHz 10MHz - 200MHz
  • 3 Selectable Inputs
  • Free Run Mode
  • <0.2ps Jitter RMS
  • RoHS 6/6

 

VFJA210 Jitter Attenuator
20 x 20 mm

SINE 10MHz - 250MHz 200MHz - 1.3GHz
  • Vibration resistant
  • VCXO designed for extremely low phase noise
  • <0.2ps Jitter RMS
  • RoHS 6/6

 

VFJA100 Jitter Attenuator
25.4 x 22 mm

PECL 8KHz - 200MHz 50MHz - 1GHz
  • 1 Input Frequency
  • 1 Output Frequency
  • <0.2ps Jitter RMS
  • RoHS 6/6

 

VFJA120 Jitter Attenuator
25.4 x 22 mm

SINE 8KHz - 100MHz 10MHz - 200MHz
  • 1 Input Frequency
  • 1 Output Frequency
  • <0.15ps Jitter RMS
  • RoHS 6/6

 

VFJA130 Jitter Attenuator
25.4 x 22 mm

CMOS 8KHz - 100MHz 10MHz - 200MHz
  • 1 Input Frequency
  • 1 Output Frequency
  • <0.18ps Jitter RMS
  • RoHS 6/6