IDA 2 Antenna Series SetSource: Narda Safety Test Solutions GmbH
This set is an expansion of Narda Safety Test Solutions’ IDA 2 Antenna Series. It includes the basic IDA 2 unit, an antenna handle, antennas 1, 2, and 3 from the series, arm support, headphones with a 3.5 mm plug, a carrying strap, an AC adapter, a USB cable, configuration software, a memory card reader, an operating manual, calibration certificates, and a hard shell case.
The IDA 2 is used to detect, classify, and localize RF signals. It features horizontal scan capabilities and automatic calculation of the emitter position. Its available modes include direction finding, spectrum, level meter, multi-channel power, time domain, and I/Q analysis.
The handle has been designed to accept antennas in horizontal and vertical positions. It contains a switchable preamplifier, a compass, position sensors, and a measurement stop/start button.
IDA Antenna 1
This antenna covers the 20 MHz to 250 MHz range. It’s ideal for interference and spurious signal searching in the VHF broadcast radio range due to its ability to operate in the ISM band at 27 MHz.
IDA Antenna 2
This antenna convers the 200 MHz to 500 MHz range. It features high measurement sensitivity, and its directional characteristic is largely independent of frequency.
IDA Antenna 3
Antenna 3 covers the 400 MHz to 6 GHz range so it can be used in the entire spectrum of mobile communications, including LTE and WLAN. It can also be used in L, S, and C band radar applications.
For more information on the IDA 2 series, download the datasheet. You can also contact Narda Safety Test Solutions directly.