Custom MMIC Adds Two New Non-Reflective Switches To Expanding Product Line
Custom MMIC, a developer of performance-driven monolithic microwave integrated circuits (MMICs), is introducing two new DC-18 GHz SPDT non-reflective switches, the CMD195C3 and the CMD196C3. While both switches cover the same bandwidth and are housed in the same 3x3 mm RoHS-compliant SMT package, they differ in their insertion loss.
The CMD195C3 has an insertion loss of 2.25 dB at the low end of its bandwidth, which then reduces monotonically to 1.5 dB at the higher frequencies. The positive slope in insertion loss versus frequency allows for several of the CMD195C3s to be cascaded together without the need for additional gain equalization circuitry. By contrast, the CMD196C3 is a general purpose SPDT design with a low insertion loss of 1.5 dB that increases slightly as the frequency approaches the upper end of the operating bandwidth.
Both switches electronically terminate the isolated port, have an isolation of 40 dB or greater, and a fast switching speed time of 1.8 nS. Switching is controlled by complementary negative logic levels of 0/-5 V. Ideal applications for these innovative new switches include microwave radio and VSAT, telecom infrastructure, test instrumentation, and military end-use.
For more information on the CMD195C3 or the CMD196C3, please visit Custom MMIC’s Product Library.
About Custom MMIC
Custom MMIC represents a new way of thinking about MMICs. Driven by customer challenges, the company offers both hands-on design through testing services, and a growing library of system-ready designs. They are experienced in GaAs, GaN, SiC, InP, and InGaP HBT and have established relationships with the leading foundries in these technologies. They specialize in RF through millimeter-wave circuits for satellite communications, radar systems, cellular infrastructure, consumer electronics, VSAT, and point-to-point radio systems. For more information, visit www.CustomMMIC.com.
SOURCE: Custom MMIC