Anritsu Introduces OTU4 Mapping Capability For MD1260A Analyzer
Single-Instrument Solution Now Capable of Conducting 40GE, 100GE, OTU3 and OTU4 Analysis on 100G OTN Equipment and Systems
Anritsu Company introduces an OTU4 mapping option for its MD1260A 40/100G Ethernet Analyzer that extends the overall measurement capability of the instrument. With the new option, the MD1260A can be configured to conduct analysis for 40GE, 100GE, OTU3 and OTU4, providing manufacturers of telecommunications and transport equipment, as well as network operators with a single-instrument solution that can assure the quality of high-speed networks forming the foundation of next-generation networks (NGNs) used in cloud computing applications.
The new option allows the MD1260A to support GMP (Generic Mapping Procedure) mapping with Ethernet client signals at OTU4 rates for Gigabit Ethernet, 10GE and 100GE client signal types to evaluate if GMP mapping is being conducted properly. It also supports all error and alarm testing at OTU, ODU, GMP, GFP-T and client layers, as well as has a client-signal adjustable clock offset at OTN frame payload. With the option, the MD1260A is the only single-instrument analyzer that can verify MUX/DEMUX and clock tolerance between OTU4 and Ethernet.
Anritsu has developed a number of other new capabilities into the MD1260A for OTU3 and OTU4 applications. An OH manipulation feature allows all OTN OH, including TCMi, TTI, and FTFL, to be monitored and edited. Additionally, OH, OTN frame and GMP can be captured for 512 OTN frames. Each OH group can be displayed as a multi-frame image, making it simple for users to identify any change in OH values.
Three types of through mode at the OTN rate are now supported by the MD1260A. The analyzer can inject random error in accordance with 0.182 to verify GFEC decoder performance, as well as support proper FEC using the OTN through mode. With this feature, users can also manipulate the OTN OH on real network data to evaluate network behavior during monitoring.
The MD1260A also conducts 40/100G tolerance tests that exceed IEEE/ITU-T standards up to +/-120 ppm at CAUI. A new service disruption time measurement (SDT) feature supports testing of the time when no frames are received, such as when there is route switching due to a fiber break.
Operating the MD1260A analyzer is easy via a large 12.1-inch touch panel and intuitive GUI. An operation log function generates remote commands automatically from the GUI, which reduces development time for automatic tests. The MD1260A also has a flash drive, and is compact and lightweight, making it well suited for the most difficult test sites.
The new OTU4 mapping option has a U.S. price of $6,242. The base MD1260A analyzer is $124,844.
Anritsu Company is the American subsidiary of Anritsu Corporation, a global provider of innovative communications test and measurement solutions for more than 110 years. Anritsu provides solutions for existing and next-generation wired and wireless communication systems and operators. Anritsu products include wireless, optical, microwave/RF, and digital instruments as well as operations support systems for R&D, manufacturing, installation, and maintenance. Anritsu also provides precision microwave/RF components, optical devices, and high-speed electrical devices for communication products and systems. With offices throughout the world, Anritsu sells in over 90 countries with approximately 4,000 employees. For more information, visit www.anritsu.com.
SOURCE: Anritsu Company