Product/Service

25 Watt CW, 10 kHz To 250 MHz RF Power Amplifier

Source: AR

75A400pic
The Model 25A250A amplifier is a self-contained, broadband unit designed for laboratory applications where instantaneous bandwidth, high gain and moderate power output are required. Utilization of push-pull MOSFET circuitry lowers distortion, improves stability and allows operation into any load impedance without damage. The Model 25A250A, when used with an RF sweep generator, will provide a minimum of 25 watts of swept power...
Request Information

Click Here To Download:
Datasheet: 25 Watt CW, 10 kHz To 250 MHz RF Power Amplifier

The Model 25A250A amplifier is a self-contained, broadband unit designed for laboratory applications where instantaneous bandwidth, high gain and moderate power output are required. Utilization of push-pull MOSFET circuitry lowers distortion, improves stability and allows operation into any load impedance without damage. The Model 25A250A, when used with an RF sweep generator, will provide a minimum of 25 watts of swept power.

The Model 25A250A includes a front panel control which permits the operator to conveniently set the amplifier's desired output level. Housed in a stylish contemporary enclosure, the Model 25A250A provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration, and use as a driver for higher power amplifiers.

The 25A250A utilizes a switching power supply with universal and autoranging input which will automatically accept from 90 to 135 VAC or from 180 to 270 VAC at 47 to 63 Hz.

Click Here To Download:
Datasheet: 25 Watt CW, 10 kHz To 250 MHz RF Power Amplifier

Click here to request pricing information for this product.

For a list of all broadband amplifiers by frequency click on link below:
Broadband Amplifiers

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information