Product/Service
RF Power Amplifier
Source: AR Modular RF
300 Watts CW, 100 - 200 MHz RF Power Amplifier delivering in excess of 300 Watts CW power into a 50-Ohm load over the frequency range of 100 MHz to 200 MHz.
Click Here To Download Amplifier Datasheet:
•Datasheet: KAA3070: 300 Watts CW, 100 - 200 MHz RF Power Amplifier
The Model KAA3070 is a Class AB wideband RF power amplifier delivering in excess of 300 Watts CW power into a 50-Ohm load over the frequency range of 100 MHz to 200 MHz. Power gain is a minimum of 55 dB. GPIB control requires the optional IEEE488.2/RS232 Interface Controller Module. The amplifier system features forward and reflected power indication on a front panel-mounted, analog meter; Automatic Level Control (ALC); RF gain control; overdrive protection; full VSWR protection; input blanking, and over-temperature protection. On the basic amplifier model these features, plus remote power on/off control, are accessible for hard-wire remote operation through a 25-pin, D-subminiature connector.
•Datasheet: KAA3070: 300 Watts CW, 100 - 200 MHz RF Power Amplifier
•Datasheet: KAA3070: 300 Watts CW, 100 - 200 MHz RF Power Amplifier
The Model KAA3070 is a Class AB wideband RF power amplifier delivering in excess of 300 Watts CW power into a 50-Ohm load over the frequency range of 100 MHz to 200 MHz. Power gain is a minimum of 55 dB. GPIB control requires the optional IEEE488.2/RS232 Interface Controller Module. The amplifier system features forward and reflected power indication on a front panel-mounted, analog meter; Automatic Level Control (ALC); RF gain control; overdrive protection; full VSWR protection; input blanking, and over-temperature protection. On the basic amplifier model these features, plus remote power on/off control, are accessible for hard-wire remote operation through a 25-pin, D-subminiature connector.
For a detailed description of these amplifier features refer to "SPECIAL FEATURES – KAA & KAW-SERIES SINGLE BAND RF POWER AMPLIFIERS". The Model KAA3070 amplifier is a 19-inch rack-mount unit, 7 inches high and 20 inches deep. Construction is completely modular; all subassemblies are readily removable. Forced-air cooling is by a highly reliable, tube-axial fan mounted on the rear panel. The amplifier operates from 95-132 or 187-265 VAC, 47-63 Hz line. The system may be placed in 'stand-by' mode with the BLANKING switch, which greatly reduces energy consumption and heat generation.
Click Here To Download Amplifier Datasheet:
•Datasheet: KAA3070: 300 Watts CW, 100 - 200 MHz RF Power Amplifier
Need More Information? Just Ask.
Click the button below to directly contact the supplier. Use it to:
- Ask a question.
- Request more detailed information or literature.
- Discuss your current project/application.
- Request a quote.
- Locate a distributor in your area.
- Schedule a demo.
