Product/Service
Multi-Standard Wireless Test Plan Application: CombiTest
•Product Overview: Multi-Standard Wireless Test Plan Application: CombiTest
Embedded DUT control in "Direct" mode
CombiTest is designed to support the full test and measurement capabilities of the MT8860B and MT8860C WLAN Test Set. Consequently, test plans can be created for use in both "Network" and "Direct" modes of operation.
With "Network" mode selected, protocol-based messaging is used by the WLAN Test Set to dynamically configure the DUT. As a result, test plans can be created that proceed to completion without manual intervention.
When "Direct" mode is selected, protocol-based messaging is not used. Instead, the DUT must be configured using chipset vendor control software - with configuration commands being sent to the DUT via a host processor interface rather than over the radio layer. In order to provide a fully automated solution, the control software and related configuration commands must be supported within CombiTest.
In partnership with a number of tier 1 chipset vendors, control packages have been developed that contain the configuration commands required for a particular chipset. As part of the overall test mode setup, a control package can be selected. When a test plan is then executed, the DUT is dynamically configured using commands sent via the host processor interface. As a result, no external control is required and the the test plan can proceed to completion.
The control packages provide an interface between CombiTest and the chipset vendors control software DLL. Due to Intellectual Property (IP) issues, the DLLs must be obtained directly from each chipset vendor. With each control package, a "Getting Started Guide" is included. This provides step-by-step instructions on how to install, register and select the package for use within CombiTest. Configuration details that are chipset related are also included in the document.
Click Here To Download:•Product Overview: Multi-Standard Wireless Test Plan Application: CombiTest
- Ask a question.
- Request more detailed information or literature.
- Discuss your current project/application.
- Request a quote.
- Locate a distributor in your area.
- Schedule a demo.
