Product/Service
Dynamic Digital Subsystem: DD48
Source: Aeroflex
The DD48 Dynamic Digital Subsystem is a self contained single slot AXIe 3.1, 48 channel mixedsignal digital subsystem. Refer to Figure 1. Each DD48 has an independent sequencer controller with pattern generators, and an independent per channel timing system. Integrated timing generators connect directly to the instrument's pin electronics. Each pin card can operate independently or synchronously with other DD48 cards. Each pin can drive and compare data up to 400 MVec/S.
Click Here To Download:
•Datasheet: Dynamic Digital Subsystem: DD48
•Datasheet: Dynamic Digital Subsystem: DD48
•Datasheet: Dynamic Digital Subsystem: DD48
Each group of 8 channels can operate independently in terms of PMU measurements, digital sample source/capture, SCAN, and channel configuration. For example, the PMU measurement hardware supports native averaging across all pins, and 6 pins can be measured in parallel. Also, SCAN can be sourced simultaneously on some pins while digital sample source/capture occurs on other pins. All this increases test efficiency and lowers cost of test.
Applications
- Digital dominant mixed signal, SOC
- Characterization, wafer sort and final test
- Multi-site, low overhead product solutions
•Datasheet: Dynamic Digital Subsystem: DD48
