- Request free information on each product by checking the appropriate box and clicking Request Information at the bottom of the page.
- You may click on the small product photo to see a larger picture as well as a more detailed description.
|
 |
|
|
|
 |
|
|
Custom Broadband Multiplexers
By: K&L Microwave, Inc.
K&L Microwave’s extensive line of custom broadband multiplexers are very useful in Radar Warning Receivers and other Electronic Warfare systems....
|
|
|
800 To 2500 MHz 50 Watt Power Amplifier - Model SR30825-47
By: Stealth Microwave
Stealth Microwave’s SR30825-47 is a solid state
GaAs FET amplifier designed for various
applications requiring superior gain flatness and
high linearity.The P1dB is +47 dBm, the linear
gain is 39 dB, and the gain flatness across the
band is ± 1.2 dB max. The unit’s 3U 19” rack
chassis incorporates many standard and optional
features, making it suitable for use in a variety of
commercial and military applications....
|
|
|
|
|
|
MMA-054025-Q3: 500 To 4000 MHz Fully Matched High Dynamic Range Amplifier
By: MicroWave Technology, Inc.
The MMA-054025 is a high linearity broadband MMIC amplifier. Packaged in low cost QFN 3X3mm lead-free Green Package, the MMIC is ideally suited for high linearity driver and high dynamic range LNA applications. The applications
include 2G, 2.5G, and 3G wireless infrastructure standards, such as GSM, TDMA, CDMA, EDGE, CDMA2000, WCDMA, TD-SCDMA, and UMTS base stations. The third order intercept point performance is excellent, typically 18 dB above the 1 dB gain compression point. MMA-054025-Q3 provides +25 dBm P1dB, +44 dBm output IP3, and 11 dB gain with 3 dB noise figure....
|
|
|
MMA-020624-Q3: 2000 To 6000 MHz Fully Matched High Dynamic Range Amplifier
By: MicroWave Technology, Inc.
The MMA-020624-Q3 is a high linearity GaAs MESFET MMIC amplifier utilizing MwT’s proprietary linear device
technology. It is in a low cost QFN 3X3mm Green Package. Applications include the driver amplifiers in 3G
cellular and WiMax/WLAN infrastructure base stations and access points. The third order intercept performance
of the MMA-020624-Q3 is excellent, typically 15 dB above the 1 dB gain compression point. It provides +25 dBm
P1dB, +40 dBm OIP3, +18.5 dBm Pave @ 2.5% EVM under 802.16/64 QAM input signal and 17 dB gain....
|
|
|
|
|
|
MMA-121630: 12 To 16 GHz Fully Matched MMIC Power Amplifier
By: MicroWave Technology, Inc.
The MMA-121630 is a 12-16 GHz GaAs MMIC amplifier. Small signal gain is typically 26.0 dB across band. It typically
provides 31 dBm power at P-1dB. This part can be used in VSAT, point to point,and defense applications, Hi-rel and
space screening is available....
|
|
|
MMA-061827: 6 To 18 GHz Power Amplifier MMIC Chip
By: MicroWave Technology, Inc.
The MMA-061827 is a 6-18 GHz GaAs power amplifier MMIC chip. Small signal gain is typically 8.0 dB across band. In a balanced configuration, input and output VSWR are better than 1.5:1 with a typical P1B more than 29 dBm, and a Psat of
30 dBm. The typical performance is shown below. MMA-061827 can be used in broadband EW and defense applications. Hi-rel and space screening are available....
|
|
|
|
|
|
MMA-022028: 2 To 20 GHz Wideband Distributed Power Amplifier
By: MicroWave Technology, Inc.
The MMA-022028 is a 2-20 GHz wideband MMIC distributed broadband power amplifier based on high reliability AlGaAs/InGaAs pHEMT technology. It provides more than 28 dBm output power at P-1dB, and 29 dBm at Psat. Small
signal gain is typically 8.0 dB across the band. Input and output return loss is typically greater than 10 dB. This part can be used in broadband EW and instrumentation applications. Special screening for hi-rel and space applications is available....
|
|
|
MMA-495930-Q4: 4.9 To 5.9 GHz Fully Matched Medium Power Amplifier
By: MicroWave Technology, Inc.
The MMA-495930-Q4 is a high linearity GaAs MESFET MMIC amplifier. It is packaged in a low cost QFN 4X4mm Green Package. Applications include the driver and the output stage of power amplifiers for WLAN and WiMax
infrastructure base stations and access points. The third order intercept performance of the MMA-495930-Q4 is excellent and is typically 15 dB above the 1 dB gain compression point. It provides +30 dBm P1dB, +45 dBm OIP3, +22.5 dBm of Pave at 2.5% EVM under 802.16/64 QAM input signal and 20 fB gain....
|
|
|
|
|
|
MHA-495433: 4.9 To 5.4 GHz 2W InGaP HBT MMIC Power Amplifier
By: MicroWave Technology, Inc.
The MHA-495433 is a high-performance reliable MMIC power amplifier utilizing high-reliability, high-breakdown voltage InGaP HBT technology. Power MMIC is ideally suited for driver or output stages in wireless applications such as 802.16 WiMAX, 802.11 WLAN & ISM, point-to-point radios & Telecom Infrastructure. MHA-495433 HBT MMIC Power Amplifier Chip has 50-ohm fully-matched output, pre-matched input, on-chip DC blocking capacitor, active bias and power detector built into the chip....
|
|
|
MMA-343737-Q10: 3.4 To 3.7 GHz 4W Linear Power Amplifier Module
By: MicroWave Technology, Inc.
The MMA-343737-Q10 is a 4 watt amplifier pre-matched to 50 ohm operating over frequency range of 3.4 GHz to 3.7 GHz. The RF gain is 13 dB. The typical output IP3 is 48 dBm and P1dB is 36.5 dBm. The MMA-343737-Q10 amplifier has excellent performance as power amplifiers in 802.11 WLAN and 802.16 WiMax applications. At 2.0% error vector magnitude (EVM), the amplifier can achieve an average output power of 29.5 dBm. The MMA-343737-Q10 is packaged in a quad flat no-lead (QFN) with a copper base paddle providing high thermal conductance, low lead inductance, small size, near-chip-scale footprint and thin profile. The package construction is RoHS compliant. It includes a detector. There is a voltage converter for gate bias. ...
|
|
|
|
|
|
MHA-333833A-Q5: 3300 To 3800 MHz Fully Matched MMIC Power Amplifier
By: MicroWave Technology, Inc.
The MMA-333833-Q5 is a high linearity InGaP HBT MMIC amplifier. It is in a low cost QFN 5X5mm Green Package. Applications include the driver and the output stage of the power amplifiers for WLAN and WiMax infrastructure base
stations and access points. The third order intercept performance of the MMA-333833A-Q5 is excellent and is typically 11 dB above the 1 dB gain compression point. It provides +33 dBm P1dB, +26 dBm Pave @2.5 % EVM under 802.16/64 QAM input signal, +44 dBm OIP3 and 25 dB gain....
|
|
|
MHA-242733-Q5: 2400 To 2700 MHz Fully Matched Power Amplifier
By: MicroWave Technology, Inc.
The MMA-242733-Q5 is a high linearity InGaP HBT MMIC amplifier. It is in a low cost QFN 5X5mm Green Package. Applications include the driver and the output stage of the power amplifiers for WLAN and WiMax infrastructure base
stations and access points. The third order intercept performance of the MMA-242733-Q5 is excellent and is typically 11 dB above the 1 dB gain compression point. It provides +33 dBm P1dB, +44 dBm OIP3 and output power of +26
dBm @ 2.5% EVM under 802.16/64 QAM test signal....
|
|
|
|
|
|
250 Watt Coupler To 250 MHz
By: Pulsar Microwave Corporation
Pulsar Model C40-111-481/5N covers the frequency range of 0.1 to 250 MHz with a power rating of 250 watts, 40 +/- 1 dB coupling, 0.4 dB insertion loss and 20 dB directivity. Coupling flatness is +/- 0.5 dB and VSWR is 1.2:1. Outline dimensions are 5.0 X 2.0 X 1.2 inches....
|
|
|
Transceiver Test Systems
By: JFW Industries, Inc.
The transceiver test system is the latest addition to JFW Industries' line of RF test systems. Its unique omni-directional design allows for complete interconnectivity and amplitude control, making it an ideal solution for transceiver testing. ...
|
|
|
|
|
|
4540 Series Power Meters
By: Wireless Telecom Group
The Boonton model 4540 Series is the instrument of choice for capturing, displaying and analyzing RF power in both the time and statistical domains. Applications include pulsed RF signals such as radar, TDMA and GSM, pseudorandom or noise-like signals such as CDMA, WLAN and WiMAX....
|
|
|
500 Watt Power Combiner
By: Pulsar Microwave Corporation
Model PP2-17-450/21N is a new broad band power combiner handling 500 watts at the sum port for the frequency range of 1 to 500 MHz....
|
|
|
|
|
|
200 Watt Coupler To 500 MHz
By: Pulsar Microwave Corporation
Pulsar Model C40-112-481/5N covers the frequency range of 0.1 to 500 MHz with a power rating of 200 watts, 40 +/- 1 dB coupling, 0.5 dB insertion loss and 20 dB directivity. Coupling flatness is +/- 0.5 dB and VSWR is 1.2:1. Outline dimensions are 5.0 X 2.0 X 1.2 inches....
|
|
|
THQ4 Series Hybrid Capacitor
By: Evans Capacitor Company
THQ4 series Hybrid Capacitors are perfectly suited for Defense and Aerospace applications requiring high power in a compact, hermetic, tantalum package. ...
|
|
|
|
|
|
DAZL!™ Series LED Drivers
By: Microsemi Corporation
The DAZL!™ Family consists of ICs, designed for LCD TV backlight units based on either High-Power or Low-Power LEDs The DAZL! architecture is designed to support a full set of advanced features including scanning backlight (D1), zone dimming (D2) and zone dimming with color control per zone (D3). ...
|
|
|
2500 To 6000 MHz 50W GaN SSPA Module - SM2560-47GN
By: Stealth Microwave
50 Watt 2.5 to 6.0 GHz GaN Power Amplifier for ECM/Wideband applications....
|
|
|
|
Product Showcase