Joint Radio Network Manager Supports Next Generation Military Satellite Comms
Joint Radio Network Manager Supports Next Generation Military Satellite Comms

Joint forces are using Joint Enterprise Network Manager, or JENM, a software application that manages lower tactical radio networks, to support the operational test of the Mobile User Objective System, or MUOS, the next generation of military satellite communication.

  • NASA’s STEREO-A Resumes Normal Operations
    NASA’s STEREO-A Resumes Normal Operations

    On Nov. 9, 2015, NASA’s Solar and Terrestrial Relations Observatory Ahead, or STEREO-A, once again began transmitting data at its full rate. For the previous year, STEREO-A was transmitting only a weak signal—or occasionally none at all—due to its position almost directly behind the sun.

  • Cool, Dim Dwarf Star Is Magnetic Powerhouse
    Cool, Dim Dwarf Star Is Magnetic Powerhouse

    Astronomers using the Atacama Large Millimeter/submillimeter Array (ALMA) have discovered that a dim, cool dwarf star is generating a surprisingly powerful magnetic field, one that rivals the most intense magnetic regions of our own Sun.

  • Ultra-Thin, Tunable, Broadband Microwave Absorber May Advance Radar Cloaking
    Ultra-Thin, Tunable, Broadband Microwave Absorber May Advance Radar Cloaking

    Microwave absorbers are a kind of material that can effectively absorb incident microwave energy to make objects invisible to radar; therefore they are commonly used in aircraft cloaking and warship stealth. By Zhengzheng Zhang

More Editor’s Picks


  • Fiber Inter-Facility Links Future Proof Satellite Ground Station Networks

    The development of high throughput satellites operating over Ku and Ka-band frequencies has increased the need for upgrading ground station inter-facility links (IFLs). RF transmissions are traditionally handled by copper coaxial cables, but they are no longer suitable due to their excessive size and restricted bandwidth. ETL Systems offers a new series of RF over fibre IFLs designed to deliver high quality RF signals across long distances with minimal loss.

Automated Phase Noise Measurements

Berkeley Nucleonics has recently enhanced the 7000 series of fully automated signal source analyzers, and has extended their measurement capabilities to 26 GHz. Not only do these devices measure absolute phase noise on a large variety CW sources, they also perform residual and absolute phase noise characterization of CW and pulsed signals, transient analysis, and VCO characterization. This application note discusses the features and benefits of two 7000 series models available for automated phase noise measurements.

The Buzz About Wireless Small Cells

Every day, networks face coverage issues at busy locations such as airports, shopping malls, and sporting/concert venues. This type of network density, coupled with high user demand, is the leading contributor to small cell growth. 

White Paper: RF Power Measurements In The Field

Measuring RF power in a field environment can be a simple task which can be accomplished accurately and inexpensively. It can also involve a great deal of care and proper training to ensure equipment is accurately measured. Either way accurate field power measurements will ensure transmitting equipment is operating properly...

Electromagnetic Design In The Electronics Industry

Technology advancements in the electronic industry yield new trends in RF communications that drive new product functionality. The use of electromagnetic (EM) simulation design tools, like FEKO, are extremely important in new advancements in the next generation of mobile phones, cameras, laptops, and other Internet of Things (IoT) devices. Incorporating EM simulation throughout the design cycle helps to explore, optimize, and innovate these new design challenges. This white paper discusses Altair’s EM solver, FEKO, and how it strives to provide solutions for design innovation in future technologies.

More Articles


ATH18G40 - 18 to 40 GHz, 450 Watt Input Power, High Gain Horn Antenna
ATH18G40 - 18 to 40 GHz, 450 Watt Input Power, High Gain Horn Antenna
The Model ATH18G40 is a wide band, high gain, high power microwave horn antenna. With a minimum gain of 15.2dB over isotropic, the Model ATH18G40 supplies the high intensity fields necessary for RFI/EMI field testing within and beyond the confines of a shielded room.
  • Wideband 7.5-18 GHz, 300 W TWT Amplifier With Gain Linearization
    Wideband 7.5-18 GHz, 300 W TWT Amplifier With Gain Linearization The dB-4410 TWTA (Traveling Wave Tube Amplifier) uses gain linearization to amplify complex waveforms with multiple pulse patterns and bursts, modulation schemes, and counter-jamming capabilities. This makes it ideal for use in radar, ECM, and communication systems. This amplifier features a modular construction, High-Reliability, a wide bandwidth, a very low phase noise, MIL-STD-461E and MIL-STD 704 compliance, and qualification for military airborne environments.
  • Site Analyzer®: SA-3600XT, 25-3600 MHz
    Site Analyzer®: SA-3600XT, 25-3600 MHz

    The 25-3600 MHz, Site Analyzer®: SA-3600XT Site Analyzer is easy to operate and field ready for first-time, occasional and experienced users. Other applications include 3G, Broadcast, Government, Tactical Military, Microwave, Paging, Public Safety, Trunking, WLAN and WLL, and TETRA.

More Products


  • XFdtd Tutorial Video: Bow Tie Antenna

    This 8-minute XFdtd getting started video details the triangle geometry construction of a bow tie antenna in Remcom’s FDTD 3D EM simulator, including the component placement of a voltage source driving the antenna. This video for new users also offers XFdtd orientation including accessing the User’s Guide and the XF project assistant work-flow checklist.

  • Antenna Matching Circuit Optimization With XFdtd EM Simulation Software And Optenni Lab

    Remcom's XFdtd 3D EM simulator integrates with Optenni Lab for antenna matching circuit optimization. This brief video shows the highlights of the workflow and integration using a GPS and Bluetooth mobile device antenna.

  • Full Wave Matching Circuit Optimization In XFdtd EM Simulation Software

    This video gives a demonstration of Full Wave Antenna Matching Circuit Optimization using XFdtd's Circuit Element Optimizer (CEO). The antenna matching circuit design flow is discussed, including CEO's analysis of a given PCB layout. Predicted S-parameters and optimal component value results for two different frequency bands are also shown.

  • Video: CPRI Cell Site Architecture, Configuration, and Results

    This video discusses how using Anritsu's MT1000A Network Master field transport tester can rival the BBU while performing quality testing.

  • Video: Anritsu Network Master Series of Optical Transport Testers Walkthrough

    Anritsu’s Network Master family of field-portable optical transport testers are designed to test service interfaces such as Ethernet, SONET/SDH, Fibre Channel and DSn, and emerging MPLS-TP, PBB-TE and ITU-T G.709 OTN. The independent two-port or four-port operation provides exceptional flexibility when testing network and transport equipment operating from 1.5 Gbps to >100 Gbps. This video provides a walkthrough of these instruments’ operation, and features the easy-to-use GUI, its test flow structure, and results reporting structure.

More Featured Videos


Anritsu Company Anritsu Company

Anritsu has been recognized as a leading provider of communications solutions for more than 100 years...

dB Control dB Control

Established in 1990, dB Control Corp., a subsidiary of the Electronic Technologies Group (ETG) of HEICO Corp., supplies mission-critical, often sole-source, products worldwide to military organizations, as well as to major defense contractors and commercial manufacturers.

Communications & Power Industries, Beverly Microwave Division Communications & Power Industries, Beverly Microwave Division

CPI BMD is the world’s largest manufacturer of receiver protectors and magnetrons. We also manufacture TWTs, CFAs, transmitter assemblies, scientific systems, high-power solid state switches and switch assemblies, pressure windows, a wide variety of multifunction components and Integrated Microwave Assemblies.

Narda Safety Test Solutions GmbH Narda Safety Test Solutions GmbH

Narda Safety Test Solutions is a leading supplier of measuring equipment in the RF safety, EMC and RF testing sectors. The RF safety product spectrum includes wideband and frequency-selective measuring  devices, and monitors for wide area coverage or which can be worn on the body for personal safety. Under the PMM brand, Narda offers instruments for determining the electromagnetic compatibility (EMC) of devices. The RF testing sector covers analyzers and instruments for measuring and identifying radio sources.


Electronic Military & Defense was developed as a resource for engineers, program managers, project managers, and other professionals involved in the design and development of electronic and electro-optic systems for a wide range of defense and aerospace applications. Check out the digital edition of our latest issue for exclusive editorial on securing the 21st century's greatest warfare asset, considerations for phase-coherent microwave measurements, using FPGAs for tuning systems to military functions, using printed energy harvesters for military, and more.

Sign up to receive a free copy of the 2015 edition!


More News


IEEE GLOBECOM 2015 December 6 - 10, 2015
San Diego, CA
More Events





"RF Globalnet is one of the best ways I've found to get our products and our brand in front of RF engineers working in a variety of different Industries." - Bryan Walker

Learn more


"RF Globalnet has been a trusted partner and has served as our main source for qualified sales leads for many years. They have a proven track record for connecting us with the right contacts, resulting in increased sales opportunities year after year." -Doug Hagan, President

Learn more


RF Globalnet is the Internet's leading source of cutting-edge technical information for the RF/microwave design community. If you are an RF/microwave design engineer or engineering manager involved in the design and development of wireless subsystems and components, or military and other radio-based communication systems at all levels, you now have access to a comprehensive web community delivering the latest updates on RF technology to give you the competitive advantage in your industry.

To provide this technical information, the site offers detailed coverage of the design and development of RF/microwave subsystems and components such as amplifiers, oscillators, modulators, attenuators, mixers, resonators, frequency synthesizers, filters, coaxial cables, connectors, switches, antennas, intergrated circuits (ICs), modules, transmitters, receivers, and transceivers. The site also includes information on discrete components such as diodes, inductors, capacitors, transistors, and resistors. We also examine the technology that creates and verifies the design, namely test and measurement equipment, computer-aided-design (CAD) tools and electronic design automation (EDA) software, among others.

RF Globalnet's database is structured to serve the needs of RF/microwave design engineers, engineering managers, system integrators, product specifiers, business executives, consultants, and others involved in the design and development of commercial wireless systems, military devices, and other commercial communication systems. Reflecting the dynamic and interactive character of the Internet, RF Globalnet is the most accurate and convenient technical source of design, product, and news information available for the rapidly changing and growing RF/microwave design industry.

Please take a moment to join our community and discover all the benefits of your FREE membership.