EDITOR’S PICKS

A UC3M Patent Can Multiply Mobile Devices’ Uploading Speed By Tenfold

A patent held by Universidad Carlos III de Madrid (UC3M) makes a jacket able to increase by tenfold the speed at which mobile devices can upload content. This is the MIMO HUB patent, which enables its jacket, in which numerous antennas are camouflaged, to connect to any mobile terminal in order to increase its data transfer speed, reduce its energy consumption and improve its reliability.

More Editor’s Picks

RECENT ARTICLES

  • Proving Installed Performance Of Airframe Microwave Assemblies
    Proving Installed Performance Of Airframe Microwave Assemblies

    A study conducted on military aircraft manufacturers by the Penton Design Engineering & Sourcing Group revealed that 29% of its participants claimed that RF/microwave cable failure that occurred in airframe microwave assemblies was caused due to damage incurred during assembly installation. Damaged airframe microwave assemblies result in system failures, re-testing, delayed production, increased maintenance downtime, and eventual replacement of the entire setup.

Overcoming Space Challenges And Reducing Costs With Small-Diameter Cable Technology

Network service providers are deploying more fiber cables than ever to keep up with bandwidth demands. While that’s good news for those who want more bandwidth, it’s not so good for the technicians needing access to existing circuits or the ability to install new ones. In order to help central offices, headends, and other areas of a service network, a microcable patchcord was developed to slow the rate of cable pile-up and ease congestion in fiber-management systems.

A Cost Effective Approach To Simulation For Electronic Warfare Systems

Electronic Warfare (EW) comes in the forms of Electronic Attack (EA), Electronic Protection (EP), and Electronic Support (ES). The tightening of the DOD’s budget has made the already complex simulation of the spectral environments encountered by EW systems in field settings even more of a challenge.

The Third Wave Of CFD: Paradigm Shift Towards Simulation-Driven Designs

This white paper covers the history of simulation flow through the first two waves of CFD (computational fluid dynamics) technology, from the beginnings of commercially available CFD software through its entering of R&D departments. Lastly, it outlines the paradigm shift occurring in CFD technology as it has now become an essential element of the product design process as simulation-driven design is more prominent now than ever.

The Unique Requirements For Wireless Medical Devices

Medical device designers and manufacturers who don’t understand the unique requirements for ensuring success in a WLAN (wireless local area network) deployed solution run the risk of their device having adverse performance, potential regulatory recalls, the need for a product re-design, revenue loss, and competitive market positioning.  

More Articles

RF GLOBALNET WELCOMES OUR NEWEST SUPPLIER

RF Globalnet Welcomes Our Newest Supplier

Atlanta Micro, Inc was founded in 2011 with the purpose of designing and manufacturing high performance RF and Microwave products for demanding customer applications. The company is based in Alpharetta, Georgia, just north of Atlanta. Our executives possess over 40 years of experience designing state‑of‑the‑art components, receivers, transceivers and systems for the military, government agencies and the test equipment community. Atlanta Micro is focused on providing best‑in‑class broadband RF solutions meeting stringent specifications while offering reduced size, weight and power consumption necessary for portable and low power platforms. Our products are designed to meet customer needs that have been identified through our extensive experience.

Learn more.

FROM THE EDITOR'S DESK

  • Amazon’s New Smartphone Boasts High-End RF And Imaging Components
    Amazon’s New Smartphone Boasts High-End RF And Imaging Components

    On July 25, Amazon released its first smartphone, and it didn’t take long for the internal components of the device to get leaked.

  • 4 Electronic Design Requirements Of The System-Integrated Soldier
    4 Electronic Design Requirements Of The System-Integrated Soldier

    Perhaps most famously portrayed in Robert Heinlein’s Starship Troopers (1959), the idea of the “future soldier” has been around for decades. As rehashed in countless science fiction films and video games, the stereotypical future soldier is equipped with a protective exoskeleton, enhanced sensory equipment, seamless communication systems, and advanced weaponry. While the concept once seemed implausible, there are many real-world projects under way focused on realizing those seemingly fictitious warfighter capabilities — by integrating a plethora of diverse electronic subsystems into a cohesively operational suit.

  • 7 Noteworthy Technologies From IMS2014
    7 Noteworthy Technologies From IMS2014

    At the 2014 IEEE MTT International Microwave Symposium earlier this month, I had the opportunity to speak with the event’s general chair, Dr. Larry Dunleavy, about the state of the RF and microwave design industry. While he acknowledged that it is a time of relative uncertainty — due in large part to constrained military budgets and conservative fiscal forecasts for 2014 — he also pointed out that there are plenty of emerging markets where RF and microwave technology is making a significant impact. With the Internet of Things (IoT) driving innovation in burgeoning markets like automotive and healthcare  and the development of 5G pushing wireless technology to further heights, there was good reason for nearly 600 companies to flock to the IMS2014 exhibition in Tampa, Fla.

More From The Editor

FEATURED PRODUCTS

SATCOM - HW Overview

SATCOM - HW Overview

With decades of experience serving the SATCOM industry, TMS offers a variety of satcom solutions for amplifiers, cables and connectors, filters, linearizers, modems, uplinks systems and amps, and communication TWTs. Many of these products are developed, manufactured, and sold under the Paradise Datacom brand. 

Vector Network Analyzer: MS2024B VNA Master

Vector Network Analyzer: MS2024B VNA Master

Modern RF/Microwave systems increasingly are pushing their performance to the limits of technology. Designers write tighter specifications on components and define more rigid signal parameters. All of which leaves Field Maintenance Personnel scrambling to find more accurate and yet affordable handheld test equipment. Anritsu introduces industry's most affordable, yet comprehensive solution, the MS2024B VNA Master (500 kHz to 4 GHz). It's a Vector Network Analyzer, it's a Power Meter and it's a Vector Voltmeter.

25 Watts CW, 0.01 to 230 MHz RF Power Amplifier

25 Watts CW, 0.01 to 230 MHz RF Power Amplifier

Manufactured by AR Modular RF, model KAA1020 is a general-purpose, wideband RF power amplifier for signals in the 10 kHz to 230 MHz frequency range.
Radiation Hazard Analysis With FEKO

Radiation Hazard Analysis With FEKO

Radiation hazard regulations and guidelines are becoming commonplace all over the world. Designers of new communication equipment and system level integrators have to apply the appropriate standards in testing and validation processes for their devices and systems to ensure the safety of personnel and combustible stores in close proximity to sources of radiation.
Mini-SMT RSMT Series SMT Resistors

Mini-SMT RSMT Series SMT Resistors

Mini-SMT thin film resistors offer maximum benefits in ohmic value ranges from .5 Ω through 500 MΩ. T.C.R.'s to ±5ppm/°C - and absolute tolerances to 0.05%. Available in 0505, 0805 and 1206 sizes, these resistors provide proven thin film performance in a surface mount solderable style
L1/L2 Portable Re-Radiating Kit

L1/L2 Portable Re-Radiating Kit

The L1/L2PNRRKIT is a Re-radiating system which allows you to re-radiate the GPS L1/L2 frequencies indoors. The L1/L2PNRRKIT consists of a plug-in Re-Radiating amplifier & a Re-Radiating Antenna.

Installed Antenna Modeling Software: Savant

Installed Antenna Modeling Software: Savant

Savant is a type of simulation software used to predict installed antenna performance and antenna-to-antenna coupling in complex environments. Its multicore, GPU and MPI parallelized engine accounts for all of the important effects that need to be taken into consideration, including creeping waves, curved surface ray divergence correction, blockage, diffraction, multi-bounce, and PTD wedge correction.

Model 5011 Terminating Power Sensor (TPS)

Model 5011 Terminating Power Sensor (TPS)

The Model 5011 Terminating Power Sensor is designed to make precision Power Measurements with the full flexibility of a portable instrument. The Model 5011, when used along with the Bird Model 5000-EX Digital Power Meter or the Bird Site Analyzer Series provides customers a TOTAL RF POWER MEASUREMENT SOLUTION to measure Base Station Power and/or Broadcast Transmitter Power with Accuracy of +/-5% of readings
More Products

FEATURED SUPPLIERS

Skyworks Solutions, Inc.

Skyworks Solutions, Inc.

Skyworks is the industry’s leading wireless semiconductor company focused on RF and complete semiconductor systems for mobile communications applications...

MtronPTI

MtronPTI

Worldwide manufacturer of frequency control products such as high precision oscillators, crystal and LC filters, precision resonators

ComNav Engineering, Inc.

ComNav Engineering, Inc.

ComNav Engineering was established in 1991 and incorporated in the state of Maine in 1994 by Martin J. Geesaman. Initially the company operated as a sole proprietorship providing engineering consulting services to several microwave filter companies. During this period, a software program entitled Filtroid was developed to assist engineers in designing microwave filters...

JFW Industries, Inc.

JFW Industries, Inc.

RF Components|Application Specific Test Systems

Newsletter Signup
Newsletter Signup
Get the latest RF/microwave industry news, insights, and analysis delivered to your inbox.
Join your peers
By clicking Sign Me Up, you agree to our Terms and that you have read our Privacy Policy.

ELECTRONIC MILITARY & DEFENSE MAGAZINE

Electronic Military & Defense was developed as a resource for engineers, program managers, project managers, and other professionals involved in the design and development of electronic and electro-optic systems for a wide range of defense and aerospace applications. Check out the digital edition of our latest issue for exclusive editorial on wearable antennas for military applications, countering EMI threats, biological and chemical threat detection, advances in optical sensing, and more.

Sign up to receive a free copy of the 2014 edition!

CURRENT HEADLINES

More News

 INDUSTRY EVENTS

More Events

READERS' CHOICE

EDITOR'S CHOICE

10 YEAR ADVERTISER CLUB

ADVERTISER SINCE 2003

"RF Globalnet has been a trusted partner and has served as our main source for qualified sales leads for many years. They have a proven track record for connecting us with the right contacts, resulting in increased sales opportunities year after year." -Doug Hagan, President


Learn more

ABOUT RF GLOBALNET

RF Globalnet is the Internet's leading source of cutting-edge technical information for the RF/microwave design community. If you are an RF/microwave design engineer or engineering manager involved in the design and development of wireless subsystems and components, or military and other radio-based communication systems at all levels, you now have access to a comprehensive web community delivering the latest updates on RF technology to give you the competitive advantage in your industry.

To provide this technical information, the site offers detailed coverage of the design and development of RF/microwave subsystems and components such as amplifiers, oscillators, modulators, attenuators, mixers, resonators, frequency synthesizers, filters, coaxial cables, connectors, switches, antennas, intergrated circuits (ICs), modules, transmitters, receivers, and transceivers. The site also includes information on discrete components such as diodes, inductors, capacitors, transistors, and resistors. We also examine the technology that creates and verifies the design, namely test and measurement equipment, computer-aided-design (CAD) tools and electronic design automation (EDA) software, among others.

RF Globalnet's database is structured to serve the needs of RF/microwave design engineers, engineering managers, system integrators, product specifiers, business executives, consultants, and others involved in the design and development of commercial wireless systems, military devices, and other commercial communication systems. Reflecting the dynamic and interactive character of the Internet, RF Globalnet is the most accurate and convenient technical source of design, product, and news information available for the rapidly changing and growing RF/microwave design industry.

Please take a moment to join our community and discover all the benefits of your FREE membership.