EDITOR’S PICKS

National Science Foundation Award Will Advance Research On How Radio Waves Interact With Body

The National Science Foundation (NSF) announced that New York University Assistant Professor Riccardo Lattanzi is a recipient of the Faculty Early Career Development Award, more widely known as a CAREER Award.

More Editor’s Picks

RECENT ARTICLES

  • Unmanned Aerial Vehicles: Growing Markets In A Changing World
    Unmanned Aerial Vehicles: Growing Markets In A Changing World

    UAVs became a common part of many people’s vernacular due to their sudden surge in use for military related applications, though in those cases, they’re typically referred to as drones. Unmanned Aerial Vehicles have numerous potential civilian applications as well though – from agricultural, forestry, and maritime studies, to border security and law enforcement use. This article discusses the growing diversity of markets for UAVs and both the challenges and opportunities they provide.

Proving Installed Performance Of Airframe Microwave Assemblies

A recent study conducted for the aerospace industry showed that 29 percent of respondents said the cause of Microwave/RF cable failure or repair is due to damage during installation. Damaged airframe microwave assemblies result in system failures, re-testing, delayed production, increased maintenance downtime, and eventual replacement of the entire setup.

Overcoming Space Challenges And Reducing Costs With Small-Diameter Cable Technology

Network service providers are deploying more fiber cables than ever to keep up with bandwidth demands. While that’s good news for those who want more bandwidth, it’s not so good for the technicians needing access to existing circuits or the ability to install new ones. In order to help central offices, headends, and other areas of a service network, a microcable patchcord was developed to slow the rate of cable pile-up and ease congestion in fiber-management systems.

A Cost Effective Approach To Simulation For Electronic Warfare Systems

Electronic Warfare (EW) comes in the forms of Electronic Attack (EA), Electronic Protection (EP), and Electronic Support (ES). The tightening of the DOD’s budget has made the already complex simulation of the spectral environments encountered by EW systems in field settings even more of a challenge.

The Third Wave Of CFD: Paradigm Shift Towards Simulation-Driven Designs

This white paper covers the history of simulation flow through the first two waves of CFD (computational fluid dynamics) technology, from the beginnings of commercially available CFD software through its entering of R&D departments. Lastly, it outlines the paradigm shift occurring in CFD technology as it has now become an essential element of the product design process as simulation-driven design is more prominent now than ever.

More Articles

RF GLOBALNET WELCOMES OUR NEWEST SUPPLIER

RF Globalnet Welcomes Our Newest Supplier

Atlanta Micro, Inc was founded in 2011 with the purpose of designing and manufacturing high performance RF and Microwave products for demanding customer applications. The company is based in Alpharetta, Georgia, just north of Atlanta. Our executives possess over 40 years of experience designing state‑of‑the‑art components, receivers, transceivers and systems for the military, government agencies and the test equipment community. Atlanta Micro is focused on providing best‑in‑class broadband RF solutions meeting stringent specifications while offering reduced size, weight and power consumption necessary for portable and low power platforms. Our products are designed to meet customer needs that have been identified through our extensive experience.

Learn more.

FROM THE EDITOR'S DESK

  • Amazon’s New Smartphone Boasts High-End RF And Imaging Components
    Amazon’s New Smartphone Boasts High-End RF And Imaging Components

    On July 25, Amazon released its first smartphone, and it didn’t take long for the internal components of the device to get leaked.

  • 4 Electronic Design Requirements Of The System-Integrated Soldier
    4 Electronic Design Requirements Of The System-Integrated Soldier

    Perhaps most famously portrayed in Robert Heinlein’s Starship Troopers (1959), the idea of the “future soldier” has been around for decades. As rehashed in countless science fiction films and video games, the stereotypical future soldier is equipped with a protective exoskeleton, enhanced sensory equipment, seamless communication systems, and advanced weaponry. While the concept once seemed implausible, there are many real-world projects under way focused on realizing those seemingly fictitious warfighter capabilities — by integrating a plethora of diverse electronic subsystems into a cohesively operational suit.

  • 7 Noteworthy Technologies From IMS2014
    7 Noteworthy Technologies From IMS2014

    At the 2014 IEEE MTT International Microwave Symposium earlier this month, I had the opportunity to speak with the event’s general chair, Dr. Larry Dunleavy, about the state of the RF and microwave design industry. While he acknowledged that it is a time of relative uncertainty — due in large part to constrained military budgets and conservative fiscal forecasts for 2014 — he also pointed out that there are plenty of emerging markets where RF and microwave technology is making a significant impact. With the Internet of Things (IoT) driving innovation in burgeoning markets like automotive and healthcare  and the development of 5G pushing wireless technology to further heights, there was good reason for nearly 600 companies to flock to the IMS2014 exhibition in Tampa, Fla.

More From The Editor

FEATURED PRODUCTS

ME7873F/ME7874F: W-CDMA TRX/Performance Test System/W-CDMA RRM Test System

ME7873F/ME7874F: W-CDMA TRX/Performance Test System/W-CDMA RRM Test System

The ME7873F W-CDMA TRX/Performance Test System is for testing the RF Transmitter and Receiver Characteristics of W-CDMA User Equipment(UE) in accordance with the 3GPP Test Spec. 34.121 R5 Chapter 5 (TX), Chapter 6 (RX), Chapter 7 (Performance), Chapter 8 (RRM) and Chapter 9 (HSDPA)

25N/FR: Ceramic-Filled Composite Materials

25N/FR: Ceramic-Filled Composite Materials

Arlon 25N and 25FR are woven fiberglass reinforced, ceramic-filled composite materials engineered for use in microwave and RF multilayer printed circuit boards.
GPS Amplifiers

GPS Amplifiers

Ciao Wireless offers a wide range of amplifiers in support of the Global Positioning System (GPS). Units are typically manufactured utilizing Balanced Circuitry to ensure stable operation with low return loss. All units feature Thin-Film Hybrid MIC construction with proven Military Reliability and Qualification. Ciao's standard models also noise figures as low as 0.45 db typical
GPS Passive MIL-Spec Splitter 1X3

GPS Passive MIL-Spec Splitter 1X3

The MIL-NLDCBS1X3 GPS antenna splitter is a one input three output power divider designed specifically for the GPS L1 & L2 carrier frequencies. The three output legs (J2-J4) are DC-Blocked to prevent antenna damage

High Power Microwave Signal Generator: Model 845-HP

High Power Microwave Signal Generator: Model 845-HP

Higher power in their signal generators was Berkeley Nucelonics’ number one request from their customers, and they delivered on it. The model 845-HP microwave signal generator is very similar to the model 845, but its wide and accurately levelled output power range (up to +23 DBM) and high spurious suppression set it apart.

AK-521F-2 Bilogical Antenna Kit -- 25 MHz - 2000 MHz

AK-521F-2 Bilogical Antenna Kit -- 25 MHz - 2000 MHz

For rapid deployment along with the mobility of small package, this Bilogical Antenna Kit provides an inexpensive solution to broadband applications.
<B>Bias Taps</b>

Bias Taps

Bias Taps from JFW Industries
R&S FSV Signal Analyzer

R&S FSV Signal Analyzer

The R&S FSV is the fastest and most versatile signal analyzer available for performance-oriented, cost-conscious users working in the development, production, installation and servicing of RF systems.
More Products

FEATURED SUPPLIERS

HUBER+SUHNER

HUBER+SUHNER

RF Interconnect: connectors, coaxial cable and assemblies, delay lines, lightning protection, picocell antennas, adaptors, terminations, attenuators, couplers, splitters|Fiber Optic Interconnect: connectors, fiber optic cable and assemblies, attenuators, splitters, optical distribution frames|Test and measurement components: test leads, adaptors, terminations, test kits

MtronPTI

MtronPTI

Worldwide manufacturer of frequency control products such as high precision oscillators, crystal and LC filters, precision resonators

Ciao Wireless

Ciao Wireless

Ciao Wireless, World's Finest Microwave Amplifiers, Space Qualified Filters & Radial Power Dividers and Combiners

JFW Industries, Inc.

JFW Industries, Inc.

RF Components|Application Specific Test Systems

Newsletter Signup
Newsletter Signup
Get the latest RF/microwave industry news, insights, and analysis delivered to your inbox.
Join your peers
By clicking Sign Me Up, you agree to our Terms and that you have read our Privacy Policy.

ELECTRONIC MILITARY & DEFENSE MAGAZINE

Electronic Military & Defense was developed as a resource for engineers, program managers, project managers, and other professionals involved in the design and development of electronic and electro-optic systems for a wide range of defense and aerospace applications. Check out the digital edition of our latest issue for exclusive editorial on wearable antennas for military applications, countering EMI threats, biological and chemical threat detection, advances in optical sensing, and more.

Sign up to receive a free copy of the 2014 edition!

CURRENT HEADLINES

More News

 INDUSTRY EVENTS

More Events

READERS' CHOICE

EDITOR'S CHOICE

10 YEAR ADVERTISER CLUB

ADVERTISER SINCE 2003

"RF Globalnet has been a trusted partner and has served as our main source for qualified sales leads for many years. They have a proven track record for connecting us with the right contacts, resulting in increased sales opportunities year after year." -Doug Hagan, President


Learn more

ABOUT RF GLOBALNET

RF Globalnet is the Internet's leading source of cutting-edge technical information for the RF/microwave design community. If you are an RF/microwave design engineer or engineering manager involved in the design and development of wireless subsystems and components, or military and other radio-based communication systems at all levels, you now have access to a comprehensive web community delivering the latest updates on RF technology to give you the competitive advantage in your industry.

To provide this technical information, the site offers detailed coverage of the design and development of RF/microwave subsystems and components such as amplifiers, oscillators, modulators, attenuators, mixers, resonators, frequency synthesizers, filters, coaxial cables, connectors, switches, antennas, intergrated circuits (ICs), modules, transmitters, receivers, and transceivers. The site also includes information on discrete components such as diodes, inductors, capacitors, transistors, and resistors. We also examine the technology that creates and verifies the design, namely test and measurement equipment, computer-aided-design (CAD) tools and electronic design automation (EDA) software, among others.

RF Globalnet's database is structured to serve the needs of RF/microwave design engineers, engineering managers, system integrators, product specifiers, business executives, consultants, and others involved in the design and development of commercial wireless systems, military devices, and other commercial communication systems. Reflecting the dynamic and interactive character of the Internet, RF Globalnet is the most accurate and convenient technical source of design, product, and news information available for the rapidly changing and growing RF/microwave design industry.

Please take a moment to join our community and discover all the benefits of your FREE membership.