EDITOR’S PICKS

Report: GaN Industrial Devices Market - 2021

According to a new market report published by Transparency Market Research “GaN Industrial Devices Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast 2015 - 2021,” the market was valued at USD 481.8 million in 2014, which is expected to reach USD 1,315.0 million by 2021, growing at a CAGR of 15.1% from 2015 to 2021.

  • Hyperconnectivity And The Future Of Internet Communication
    Hyperconnectivity And The Future Of Internet Communication

    Hyperconnectivity and the Future of Internet Communication (Lambert Academic Publishing, May 2015) is the title of a new book edited by City University London Professor of Pervasive Computing, Professor Adrian Cheok. By John Stevenson

  • NIST Aims For Tool To Help Manufacturers Select Optimal Wireless Network
    NIST Aims For Tool To Help Manufacturers Select Optimal Wireless Network

    Going wireless is appealing to a growing number of manufacturers. Using wireless sensor networks to monitor and control equipment and processes eliminates the costly labyrinth of dedicated cabling to hardwire devices, enables flexibility in organizing operations, and expands opportunities for keeping tabs on plant-floor conditions and performance.

  • Voltage-Controlled Liquid Metal Antennas
    Voltage-Controlled Liquid Metal Antennas

    Researchers have held tremendous interest in liquid metal electronics for many years, but a significant and unfortunate drawback slowing the advance of such devices is that they tend to require external pumps that can't be easily integrated into electronic systems.

More Editor’s Picks

MUST SEE PRODUCTS AT IMS 2015

GaN Wideband Power Amplifier: NPA1007

GaN Wideband Power Amplifier: NPA1007

The NPA1007 is a 20 - 2500 MHz, wideband GaN power amplifier. This amplifier has output levels to 10 W (40 dBm) and is specifically designed for saturated and linear operation.

High Performance Amplifiers from Teledyne Microwave Solutions

High Performance Amplifiers from Teledyne Microwave Solutions

High Performance Amplifiers from Teledyne Microwave Solutions.

GORE-FLIGHT Microwave Assemblies

GORE-FLIGHT Microwave Assemblies

GORE-FLIGHT™ Microwave Assemblies are cable solutions designed with an internally ruggedized construction made to withstand concentrated loads well in excess of those specified by MIL-T-81490. The cables are flexible and inherently resistant to over-bending, making the cables easier to install within the confines of an aircraft. GORE-FLIGHT™ Microwave Assemblies are available in Standard Series or 6 Series.

IMS Resource Center

IMS Resource Center

RF Globalnet's IMS resource center is comprised of the latest products, news, articles, and video coverage from this and past year's shows. Click here to access it.

Non-Blocking RF Switch Matrix

Non-Blocking RF Switch Matrix

A non-blocking RF switch matrix is more complex than the blocking type, but it’s also more flexible.  In this configuration, an input can be switched to multiple outputs.  One input can in fact be switched to all of the outputs at once.  This provides an extra degree of flexibility compared to the blocking architecture.  However, a non-blocking architecture still has the limitation of not allowing two or more inputs to be switched to the same output.  Input 1 for example can be simultaneously switched to every output or selectively switched to several outputs at once, but no other input can be switched to any of the same outputs.

Vector Network Analyzers: MS4640B Series

Vector Network Analyzers: MS4640B Series

Anritsu’s MS4640B vector network analyzers (VNAs) are a part of the VectorStarTM family, and provide the highest overall performance on a modern analyzer platform. They cover the 70 kHz to 70 GHz frequency range and offer 2.5 ns pulse resolution with a 100 dB dynamic range.

Click here for more on IMS 2015

RECENT ARTICLES

  • High Power and High Efficiency Ka Band Power Amplifier

    The Northrop Grumman Corporation has announced the highest power output for a single Ka-Band MMIC power amplifier ever produced to date. A team led by Salah Din recorded a peak power of 40 Watts at 27 GHz for the 27-30 GHz amplifier, with an average output power of 36 watts and a Power Added Efficiency (PAE) of greater than 30 percent across the band. The demonstration found a significant improvement in performance over current Ka-band MMIC amplifiers.

GaN Gives Power and Flexibility to L-Band Radar

Radar sales are on the rise, increasing the production of air traffic control radar systems,  and resulting in the intensified research and development on improving the performance of the L-band, which requires high pulsed power. High-power RF transistors need to be employed and GaN offers the solution. GaN is the leading semiconductor technology used in the construction of RF power transistors, enabling breakthroughs in power output capacity, temperature tolerance and efficiency.

Key Considerations for Designing a Wireless Medical Device

Mobile medical devices in today’s world require constant connectivity and security for the safety of its patients as well as for efficiency in the hospital. When considering such necessities, medical device companies need to understand that there are unique requirements to ensure the success of their WLAN deployed solution within a hospital environment. If any of these requirements are overlooked, there may be results of poor performance and potential regulator recalls.

A Step Change in Electronics Thermal Design: Incorporating ADE and MDA Design Flows

When it comes to electronics, it is important to keep the complete design cycle shorter than traditional manufacturing, as delays in product release can severely affect profit. In electronic equipment, overheating causes electronic semiconductor chips to prematurely fail, and end up disabling the entire equipment. Appropriate cooling strategies are needed to prevent overheating and failure of critical components. Mechanical engineers have collaborated with electronic designers to incorporate electronic design automation (EDA) software and mechanical design automation (MDA) software into the thermal design of electronics.

Unmanned Aerial Vehicles: Growing Markets In A Changing World

UAVs became a common part of many people’s vernacular due to their sudden surge in use for military related applications, though in those cases, they’re typically referred to as drones. Unmanned Aerial Vehicles have numerous potential civilian applications as well though – from agricultural, forestry, and maritime studies, to border security and law enforcement use. This article discusses the growing diversity of markets for UAVs and both the challenges and opportunities they provide.

More Articles

RF GLOBALNET WELCOMES OUR NEWEST SUPPLIER

RF Globalnet Welcomes Our Newest Supplier

Atlanta Micro, Inc was founded in 2011 with the purpose of designing and manufacturing high performance RF and Microwave products for demanding customer applications. The company is based in Alpharetta, Georgia, just north of Atlanta. Our executives possess over 40 years of experience designing state‑of‑the‑art components, receivers, transceivers and systems for the military, government agencies and the test equipment community. Atlanta Micro is focused on providing best‑in‑class broadband RF solutions meeting stringent specifications while offering reduced size, weight and power consumption necessary for portable and low power platforms. Our products are designed to meet customer needs that have been identified through our extensive experience.

Learn more.

FEATURED PRODUCTS

Laminate Composites For RF/Microwave Applications

Laminate Composites For RF/Microwave Applications

Arlon Microwave Materials specializes in products made from fluoropolymers (i.e. PTFE), ceramic-filled fluoropolymers, ceramic-filled hydrocarbon thermosets, and other materials that deliver the electrical performance needed in frequency-dependent circuit applications. These products are supplied as copper-clad laminates with bonding plies, or prepregs, for production of multilayer printed circuits. Arlon has over "50 years of experience in microwave materials", today providing products that are used to make combiner boards and feed networks for microwave applications as well as basestation antennas and power amplifier boards for the wireless telecommunications infrastructure market.
Spectrum and Signal Analyzer for Satellite Communications: NRA-2500

Spectrum and Signal Analyzer for Satellite Communications: NRA-2500

The NRA-2500 covers the 5 MHz to 2.5 GHz frequency range and is ideal for use as a starter model for satellite monitoring and control systems. It’s optimized for use in D-SNG vehicles, teleports, and in maritime applications.

Amplifiers - Radar And Communication - 17 GHz To 22 GHz

Amplifiers - Radar And Communication - 17 GHz To 22 GHz

Ciao Wireless specializes in the design and manufacture of RF and microwave amplifiers and assemblies for both the Defense and Commercial industries in millimeter wave frequencies...
dB-4409 TWT Amplifier

dB-4409 TWT Amplifier

The dB-4409 is a 9-inch, pod-mounted, dual-band Traveling Wave Tube Amplifier (TWTA) operating in the 2 to 18 GHz frequency range and providing 300 Watts, continuous wave power.

Model 50HB-XX SMA: Fixed Attenuator

Model 50HB-XX SMA: Fixed Attenuator

The Model 50HB-XX SMA Fixed Attenuator from JFW Industries features a frequency range of DC to 6000 MHz...
2-18 GHz 2-Way Splitter: AM4001

2-18 GHz 2-Way Splitter: AM4001

This 2-way 0o splitter covers the 2-18 GHz range. It comes in a 4mm QFN package and features 1.7 dB insertion loss, 20 dB isolation, 10 dB return loss, and a -40 to +85C operating temperature. For a functional diagram and information on its performance, download the datasheet.

Waveguide Applications Of FEKO

Waveguide Applications Of FEKO

Waveguide has become an indispensable technology in all industries of transmitting systems. The FEKO support team recognises that FEKO’s users may also want to apply FEKO to waveguide structures and this application note highlights some of the benchmark simulations of waveguide components that have been done with FEKO.

MTT-S: Coaxial Switches

A line of coaxial switches will be display during this year’s MTT-S showcase in Anaheim
More Products

FEATURED SUPPLIERS

HUBER+SUHNER

HUBER+SUHNER

RF Interconnect: connectors, coaxial cable and assemblies, delay lines, lightning protection, picocell antennas, adaptors, terminations, attenuators, couplers, splitters|Fiber Optic Interconnect: connectors, fiber optic cable and assemblies, attenuators, splitters, optical distribution frames|Test and measurement components: test leads, adaptors, terminations, test kits

AR Modular RF

AR Modular RF

AR Modular RF designs and builds some of the most durable, innovative, dependable, and versatile RF amplifier modules and RF amplifier systems in the world.
Narda Safety Test Solutions GmbH

Narda Safety Test Solutions GmbH

Narda Safety Test Solutions is a leading supplier of measuring equipment in the RF safety, EMC and RF testing sectors. The RF safety product spectrum includes wideband and frequency-selective measuring  devices, and monitors for wide area coverage or which can be worn on the body for personal safety. Under the PMM brand, Narda offers instruments for determining the electromagnetic compatibility (EMC) of devices. The RF testing sector covers analyzers and instruments for measuring and identifying radio sources.

Newsletter Signup
Newsletter Signup
Get the latest RF/microwave industry news, insights, and analysis delivered to your inbox.
Join your peers
By clicking Sign Me Up, you agree to our Terms and that you have read our Privacy Policy.

ELECTRONIC MILITARY & DEFENSE MAGAZINE

Electronic Military & Defense was developed as a resource for engineers, program managers, project managers, and other professionals involved in the design and development of electronic and electro-optic systems for a wide range of defense and aerospace applications. Check out the digital edition of our latest issue for exclusive editorial on wearable antennas for military applications, countering EMI threats, biological and chemical threat detection, advances in optical sensing, and more.

Sign up to receive a free copy of the 2014 edition!

CURRENT HEADLINES

  • New 5G Innovations Boost Mobile Data Speeds

    Today, your LTE smartphone receives transmissions from one cell at a time, and many different techniques are used to ensure that you stay connected as you move between cells.

  • Anokiwave’s Dr. Ian Gresham Named IEEE Fellow
    Anokiwave’s Dr. Ian Gresham Named IEEE Fellow

    Dr. Ian Gresham of Anokiwave Inc. has been named a fellow of the Institute of Electrical and Electronics Engineers (IEEE) for his technical leadership in commercial automotive radar senses. The IEEE Fellow is the highest grade of membership and is recognized by the technical community as an important career achievement, and a prestigious honor.

  • Anokiwave Closes Series B Funding To Be Used For Growth

    Anokiwave Inc. recently announced their completion of a Series B round of funding. The funds gathered will be used to continue to expand its engineering team, launch development laboratory facilities, and expand new products for mmW 5G and complimentary markets.

  • Linking Superconductivity And Structure
    Linking Superconductivity And Structure

    New research from a team including Carnegie's Elissaios Stavrou, Xiao-Jia Chen, and Alexander Goncharov hones in on the structural changes underlying superconductivity in iron arsenide compounds--those containing iron and arsenic. It is published by Scientific Reports.

  • For Sale: German 700 MHz Band, $600M Minimum Bid

    The Bundesnetzagentur - the German regulatory office for electricity, gas, telecommunications, post, and railway markets - is auctioning off frequencies for mobile phone operators this week. Three large companies were admitted to the to the auction, which started on Wednesday. Auction proceeds will be used to expand broadband internet access in Germany. 

  • New Tech Keeps Your Smart Phone Charged For 30 Percent Longer

    New technology developed at The Ohio State University makes cell phone batteries last up to 30 percent longer on a single charge. By Pam Frost Gorder

More News

 INDUSTRY EVENTS

More Events

READERS' CHOICE

EDITOR'S CHOICE

10 YEAR ADVERTISER CLUB

ADVERTISER SINCE 2002

"RF Globalnet is one of the best ways I've found to get our products and our brand in front of RF engineers working in a variety of different Industries." - Bryan Walker

Learn more

ADVERTISER SINCE 2003

"RF Globalnet has been a trusted partner and has served as our main source for qualified sales leads for many years. They have a proven track record for connecting us with the right contacts, resulting in increased sales opportunities year after year." -Doug Hagan, President


Learn more

ABOUT RF GLOBALNET

RF Globalnet is the Internet's leading source of cutting-edge technical information for the RF/microwave design community. If you are an RF/microwave design engineer or engineering manager involved in the design and development of wireless subsystems and components, or military and other radio-based communication systems at all levels, you now have access to a comprehensive web community delivering the latest updates on RF technology to give you the competitive advantage in your industry.

To provide this technical information, the site offers detailed coverage of the design and development of RF/microwave subsystems and components such as amplifiers, oscillators, modulators, attenuators, mixers, resonators, frequency synthesizers, filters, coaxial cables, connectors, switches, antennas, intergrated circuits (ICs), modules, transmitters, receivers, and transceivers. The site also includes information on discrete components such as diodes, inductors, capacitors, transistors, and resistors. We also examine the technology that creates and verifies the design, namely test and measurement equipment, computer-aided-design (CAD) tools and electronic design automation (EDA) software, among others.

RF Globalnet's database is structured to serve the needs of RF/microwave design engineers, engineering managers, system integrators, product specifiers, business executives, consultants, and others involved in the design and development of commercial wireless systems, military devices, and other commercial communication systems. Reflecting the dynamic and interactive character of the Internet, RF Globalnet is the most accurate and convenient technical source of design, product, and news information available for the rapidly changing and growing RF/microwave design industry.

Please take a moment to join our community and discover all the benefits of your FREE membership.