| Datasheet: Test Cell, 27 MHz to 4.2 GHz |
The Model TC4000B test cell is one of a series of ARcell test cells that bridge the gap between size limited TEM
(transverse electromagnetic) cells and expensive anechoic chambers for making pre-compliance radiated
immunity and radiated emissions measurements on large test objects. |
11/20/2008 |
50.2 KB |
| Datasheet: Test Cell, 27 MHz to 4200 MHz |
The Model TC3000B test cell is one of a series of ARcell test cells that bridge the gap between size limited TEM
(transverse electromagnetic) cells and expensive anechoic chambers for making pre-compliance radiated
immunity and radiated emissions measurements on large test objects. |
11/20/2008 |
50.5 KB |
| Datasheet: 1700 Watts Pulse, 1 To 2.5 GHz Traveling Wave Tube (TWT) Microwave Amplifier |
The Model 2000TP1G2B is a self contained, forced air cooled, broadband traveling wave tube (TWT) microwave amplifier
designed for pulse applications at low to moderate duty factors where instantaneous bandwidth, reduced harmonics and
high gain are required. |
11/20/2008 |
49.2 KB |
| Datasheet: GT-8888A: USB Power Sensor, 10 MHz To 8 GHz, CW |
The Giga-tronics GT-8888A USB Power Sensor with 10 MHz to 8 GHz frequency coverage, operational to 10 GHz, accurate power measurement of continuous wave (CW) RF and microwave signals.
|
11/18/2008 |
1.13 MB |
| Datasheet: GT-8553A: USB Power Sensor, 10 MHz to 18 GHz, CW |
The GT-8553A USB Power Sensor with 10 MHz to 18 GHz frequency range, are both optimized for fast, accurate power measurement of continuous wave (CW) RF and microwave signals. |
11/18/2008 |
1.08 MB |
| Datasheet: GT-8551A: USB Power Sensor, 100 MHz To 8 GHz, CW And Modulation |
The Giga-tronics GT-8551A 100 MHz to 8 GHz, operational to 10 GHz, USB Power Sensor can be used in wireless communications and component testing wherever signals with modulation are present. Measurement modes include modulated average power, burst average power and crest factor.
|
11/18/2008 |
1.05 MB |
| Software: Dionysus Microwave Filter Design |
Comnav recently updated its Dionysus filter design software. This new version corrects a few hidden bugs, corrects the limits on ceramic resonator style filters, and allows the user to set the bandwidth search in the analysis plot... |
11/18/2008 |
3.10 MB |
| Application Note: Application And Design Of Gunn Oscillators |
Gunn diodes have been commercially successful as microwave oscillators since the late 1960's. They are
employed wherever a stable low cost microwave source is needed. Gunn oscillators have found many slots
throughout the industry including communications: as mixer local oscillators, pumps for parametric amplifiers,
TX and RX oscillators for radio communications, radar sources - including police radar, commercial, and military,
wireless LANs and also as detectors: commercial sensors for detecting: velocity, direction, proximity, or
level sensing alarms. They have now found new markets in vehicular collision avoidance and intelligent cruise
control. |
11/13/2008 |
176.8 KB |
| Product Overview: Millimeter-Wave Transceivers And Other Custom-Designed Products |
HXI supplies millimeter wave subsystems and customdesigned
components to support military and commercial
systems worldwide. Subsystems include
transceivers for UAV and helicopter landing systems,
surveillance receivers, active sensors for medical research
and specialized communication links for a wide
range of applications. Custom components include
variations of many of our catalog products, such as
LNAs, power amplifiers and power combiners, frequency
multipliers, mixers, switches and isolators. |
11/13/2008 |
263.1 KB |
| Datasheet: Balanced Mixers |
The HBM series of broadband balanced mixers
covers the waveguide bands from 18–110
GHz. They utilize a low loss structure mated to
a matched pair of GaAs Schottky beam lead
diodes for minimum conversion loss and maximum
bandwidth. Superior LO noise suppression
and LO-RF isolation values are inherent
design features. |
11/13/2008 |
137.1 KB |
| Datasheet: Gunn Oscillators And VCOs |
The HGM and HGV series Gunn Oscillators
cover the range from 7 – 150 GHz. A wide
variety of designs provide the user with a
solution for most applications. Units are
available with mechanical and/or electrical
tuning, providing many possible tuning
configurations. Superior frequency and power
stability are achieved using cavity design and
diode selection. Heaters can be provided to
achieve greater frequency stability. |
11/13/2008 |
197.7 KB |
| Datasheet: Millimeter-Wave High Power Amplifiers |
The HHPA Series of High Power Amplifiers
covers the frequency range from 18 – 100 GHz.
A wide variety of gain and bandwidth combinations
provide the designer with a solution for
most applications. MMIC technology is employed
for high reliability and repeatability. |
11/13/2008 |
147.5 KB |
| Datasheet: GigaLink 60 GHz And E-Band Radios |
HXI's GigaLink Series is a family of full-duplex point-to-point wireless bridges that offers affordable, highly reliable, short and medium range outdoor links for Gigabit Ethernet (1.25 Gbps) interfaces.
|
11/13/2008 |
29.8 KB |
| Datasheet: Series HMI And HMC Millimeter-Wave Isolators And Circulators |
The HMI AND HMC series broadband ferrite
junction isolators and circulators are available
from 18 - 110 GHz. They utilize a low loss H-plane
structure in a modified Y-junction format to provide
minimum loss with maximum isolation and bandwidth.
2 GHz bandwidths with 20 dB of isolation
are standard. Wider bandwidth, high power handling
and magnetic shielding are available in select
units. |
11/13/2008 |
100.9 KB |
| Datasheet: PIN Diode Switches |
The HSW series of broadband PIN Diode
switches covers the waveguide bands
from 18 - 110 GHz. The switches utilize a
low loss finline structure with silicon or
GaAs beam lead diodes for minimum insertion
loss and maximum isolation. Superior
performance in a compact size is featured
in these designs. Gold plated housings
are used to achieve maximum performance
and reliability. Full waveguide
band SPST units can be provided up to 60
GHz and 10 GHz bandwidths to 110 GHz.
SPDT units have up to 10 GHz bandwidth. |
11/13/2008 |
133.9 KB |
| Datasheet: Balanced Upcoverters |
The HBUC series broadband balanced
upconverters cover a wide range of waveguide
bands from 18–110 GHz. They utilize a low loss
structure mated to a matched pair of GaAs
Schottky beam lead diodes for minimum conversion
loss and maximum bandwidth. Superior LO
noise suppression and LO-RF isolation values
are design features. |
11/13/2008 |
141.9 KB |
| Datasheet: Medium Power Amplifiers - HMPA Series |
The HMPA Series of Medium Power Amplifiers
covers the range from 18 to 100 GHz. A wide
variety of gain and bandwidth combinations provide
the system designer with a solution for most
applications. MMIC technology is employed for
high reliability and repeatability. |
11/13/2008 |
123.8 KB |
| Datasheet: Model 3611 - 60 GHz FMCW Module |
HXI provides 60 GHz front ends for use in industrial sensors. With these front ends, customers have implemented software linearization to obtain 1% linearity. |
11/13/2008 |
55.6 KB |
| Datasheet: High-Power PIN Diode Switches |
The HSWM series of broadband high
power switches covers the waveguide
bands from 18 - 80 GHz. They utilize a low
loss microstrip structure using GaAs
MMICs which also offer high RF power
handling. Superior performance in a compact
size is featured in these
designs. |
11/13/2008 |
62.9 KB |
| Datasheet: Millimeter-Wave Detectors |
The HFD series broadband detectors cover full
waveguide bands from 18 – 110 GHz . They
utilize a low loss finline structure mated to a zero
bias Schottky beam lead diode for maximum
output and bandwidth. The RF energy is converted
to a DC voltage resulting in a detector
mount having high levels of sensitivity over a
broad dynamic range. Since zero bias diodes
are used, no bias is required and both negative
and positive voltage outputs are available. |
11/13/2008 |
93.7 KB |
| Catalog: Millimeter-Wave Components |
HXI supplies millimeter wave-components and subsystems to support military and commercial systems worldwide. Products include transceivers, low-noise and power amplifiers, frequency multipliers, switches and ferrite-based products in a core frequency range of 18 to 110 GHz. |
11/13/2008 |
2.94 MB |
| Datasheet: Broadband Multipliers |
The HMM Series Multipliers cover the range from
18 - 100 GHz. A wide variety of doubler and tripler
designs provide the designer with a solution for many
applications. Full waveguide band units are available
through 100 GHz. These multipliers are used as
frequency extenders in test equipment and as mixer
LO’s. Standard units are available to be driven with
10-40 mW and high power options are available for 100
mW drive. No DC bias is required. |
11/13/2008 |
129.1 KB |
| Datasheet: PIN Diode Attenuators |
The HVA series broadband PIN diode
attenuators cover the waveguide bands from
18 - 110 GHz. The attenuators are available
for applications requiring variations in power
levels using a control voltage. A 0 to + 5 V
tuning range is used to control the attenuation
level. This design utilizes a low loss
finline structure with beam lead diodes for
minimum insertion loss and optimum attenuation
flatness. |
11/13/2008 |
120.6 KB |
| Datasheet: Model 3723 - 60 GHz FMCW Module |
HXI provides 60 GHz front ends for use in industrial sensors. With these front ends, customers have implemented software linearization to obtain 1% linearity |
11/13/2008 |
56.4 KB |
| HXI Company Introduction |
HXI supplies millimeter wave sub-systems and
custom-designed components to support military
and commercial systems worldwide |
11/13/2008 |
306.4 KB |
