|
Wireless
Technologies Products
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RF Connectors
|
|
 Winchester Electronics' BMA RF connectors provide the ability to blindmate, or fasten connectors together without visually seeing the connector interfaces mate. This is accomplished by a .030" radial and a .081" axial float designed into the interface.
Download
the catalog pages for specifics.
|
|
|
|
|
|
Microwave Interconnect System
|
|
 The G3PO from Corning Gilbert offers increased package density, low weight, and performance at a high frequency. A
nano-miniature interconnect system, the G3PO's push-on design enables quick and easy installation in equipment such as manned and unmanned military vehicles, radars, satellites, missiles, and wireless systems.
Download
the product datasheet for more information.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Spectrum Analyzer
|
|
 The R&S FSU67 from Rohde & Schwarz is a spectrum analyzer with a direct frequency range to 67 GHz and fundamental mixing. It is suitable for developers of military radar, communications, electronic warfare, and electronic countermeasures systems.
Download the product datasheet for specifics.
|
|
|
RSS
Remcom's Wireless InSite is a tool for modeling the effects of buildings and terrain on the propagation of electromagnetic waves. It can be used to predict how the locations of transmitters and receivers within an urban area affect the signal strength.
The micro-miniature IPX connector from Lighthorse Technologies is 100% form-, fit-, and function-compatible with all U.FL Hirose series interfaces. Operating up to 6 GHz, the low profile (2.5 mm) IPX series has a 3 mm square PCB footprint.
AR provides power amplifiers for virtually every kind of wireless system, or application, including CDMA, HDTV, and WiMAX. The company also recently added a new line of solid-state amplifier modules.
The 9103 Handheld Spectrum Analyzer from Boonton Electronics provides RF engineers and service technicians with the performance of a workbench analyzer in a handheld form, with a frequency range of up to 7.5 GHz.
The LNFA1X4 Low-Noise, Filtered, Amplified GPS Splitter
from GPS Networking is a one-input, four-output device with 0 dB nominal gain. The device features a low-noise input section to establish an overall system noise figure.
The PLXO Series of phase-locked crystal oscillators from EM Research offer outputs from 5 to 400 MHz for use as sampling clocks for D-A / A-D converters, reference clocks for next generation DDS, and clock synchronizers for SONET / SDH / DSP applications.
MT Series transcoders from Linx Technologies are designed for bi-directional remote control applications. Eight status lines can be set up in any combination of inputs and outputs for the transfer of button or contact states.
The Anritsu BTS Master MT8222A is suitable for deploying, maintaining, and troubleshooting 2G/2.5G and 3G wireless base stations. The BTS Master can be configured with an interference analyzer, which is maximized by the MT8222A's built-in low-noise preamplifier.
The RSA3300B spectrum analyzer from Tektronix makes it easy for you to discover design issues that other signal analyzers miss. The DPX spectrum display offers an intuitive live color view of signal transients changing over time in the frequency domain.
SKY77519 from Skyworks Solutions is a very low profile TX-RX FEM designed for quad-band cellular handsets comprising GSM850/900, DCS1800, and PCS1900 operation, and Class 12 GPRS multi-slot operation and EDGE Polar Modulation.
Yellowjacket B/A/G from Berkeley Varitronics Systems is a wireless test receiver system that demodulates, sweeps, analyzes, and optimizes all popular 802.11 Wi-Fi network standards including 802.11b/g (2.4 GHz) and 802.11a (5 GHz).
The AeroComm AC4424 is a 2.4 GHz FHSS digital transceiver that operates in a point-to-point, point-to-multipoint, or multipoint-to-multipoint architecture. It is composed of a complete, agency-certified radio and sophisticated RF232 protocol.
The MASW-000822-12770T from M/A-COM is a high-linearity, SPDT switch that will handle over 8 watts of CW power with insertion loss as low as .35 dB and isolation as high as 26 dB at 3.8 GHz, along with IIP3 over 60
dBm.