AR RF/Microwave Instrumentation's 'S' series of microwave amplifiers are "full class A" and provide superior linearity all the way to the rated power. This 1 to 800 watt, 0.8 to 20 GHz family of amplifiers gives you more useable power and unequalled performance for your wireless, RF, and EMC testing.
Learn more.
As
over-the-air (OTA) testing is becoming
standardized and is being adopted by network
providers, more pressure is being exerted on
the RF engine in a mobile device to improve
its performance in real-world scenarios.
Because of this increased emphasis on OTA
testing, the total radiated power (TRP)
performance of the power amplifier is becoming
increasingly important...
Today many test labs are seeing a continued increase in RF test levels and increased test distances. AR RF/Microwave Instrumentation has responded to this need with a new offering of Subampability. As the world moves further and further into the digital and wireless age the need for flexibility of test equipment becomes a necessity...
Teledyne Cougar's line of cascadable amplifiers includes many multiple stage amplifiers where some of the cascading has been integrated into a single package. This application note details the properties and specifics of these cascadable amplifiers...
The IEEE Topical Symposium on Power Amplifiers for Wireless Communications will be held January 21 - 22 in Orlando, Florida as part of
Radio and Wireless
Week. This conference concentrates on the latest in power amplifier approaches and results in infrastructure and portable terminals for cellular, wireless personal, local and wide area networking, and emerging applications.
Learn
more.
The LMA008 from Labtech is a low-noise, broadband, solid-state, linear amplifier that operates over the frequency range of 2 to 6 GHz. The unit is
designed for use in military environments and incorporates integral regulation and temperature compensation.Download
the product datasheet for details.
The model YH1518 low phase noise miniature VHF OCXO from Greenray Industries can be ordered at any frequency between 110 and 250 MHz. This unit is well suited for applications such as frequency translation, LO sources, and clocking of high speed data converters and gate arrays.
Download
the product datasheet for specifics.
The SKY73100 voltage-controlled oscillator (VCO)/synthesizer from Skyworks is a fully-integrated signal source for high dynamic range transceivers. The device provides low phase noise performance for 2G, 2.5G, and 3G base station transceivers.
Download
the product datasheet for specifics.
The MwT-LP7 from MicroWave Technology is a low phase noise GaAs MESFET device with nominal quarter-micron gate length and 250-micron gate width.
It is suitable for oscillator applications requiring ultra-low phase noise up to 31 GHz or amplifiers requiring low residue noise in the 500 MHz to 26 GHz frequency range.
Download
the product datasheet for details.
Ciao Wireless offers a line of high-performance cascadable
low frequency amplifiers for connectorized applications. Frequency coverage includes multiple models with various bands from 10 MHz to 8 GHz.
Download
the product catalog for more information.
Teledyne Microwave has introduced an ultra-low phase noise YIG-tuned oscillator (YTO) in a miniaturized board-mount package that provides for continuous coverage of the 3 to 8 GHz frequency band. It is available in a TO-8B, 12-pin package, or a surface-mount package.
Download
the product catalog for details.
Terabeam provides 60 GHz low-noise and high-power amplifiers from stock to 30 day delivery. A wide variety of gain and bandwidth combinations are available to provide designers with a solution for most applications.Download the
product datasheet for details.
Tyco Electronics has developed three M/A-COM ultra low noise amplifiers that achieve less than 1 dB NF and are tunable over a wide frequency range. They are suitable for a variety of applications including GPS, WiMAX, DAB, and MoCA.Download the product
datasheet for more information.
Teledyne
Cougar's cascadable amplifiers are used in airborne
and satellite communications equipment, navigation and guidance
systems, radar and sonar equipment, telemetry electronics,
surveillance, and reconnaissance systems, and in high-performance
commercial test equipment.Request
more information from Teledyne Cougar on its cascadable amplifiers.
Narda Microwave-East
recently added a broad range of microwave amplifiers to its offering of standard catalog products. These amplifiers feature standard bandwidths, and octave and multi-octave bands in the .5 to 18 GHz frequency range.
Download
the product guide for specifics.
The LX Series of low-cost synthesizers from EM Research is suitable for high-volume applications. These synthesizers cover the frequency range of 50 MHz to 3.6 GHz (in specific bands) and come in small 0.75" square packages.Download the
product datasheet for specifics.
The PEC-12-50M40G-4R0-15-SFF
ultra-broadband amplifier from Planar Electronics Technology offers 12 dB of gain while providing a low midband noise figure of 4 dB. Production units are now available.Download
the product datasheet for details.
The MLA20RPDC GPS line amplifier from GPS Networking is a one-input, one-output device with a 20 dB min. gain block in a miniaturized housing. The frequency response covers the GPS L1 and L2 bands with excellent gain flatness.
Download
the product datasheet for details.
Serving a worldwide base of commercial and military clients, Precision Devices
(PDI) manufactures a wide variety of crystal oscillators in custom and SMD
packages.
Request
more information from PDI on these oscillators.
These voltage-controlled oscillators (VCOs) from RFMD Multi-Market Products Group provide customers with a fully-integrated oscillator solution in a compact form factor. VCOs are available in a variety of industry-standard packages.Request more information from RFMD on these VCOs.
Designed for linear application in the 500 to 1000 MHz range, this amplifier from NP Technologies utilizes RF power MOSFET devices that provide high gain, wide dynamic range, and an excellent 3rd order intercept point.
Download the product datasheet for
specifics.
RSS
The IEEE Topical Symposium on Power Amplifiers for Wireless Communications will be held January 21 - 22 in Orlando, Florida as part of
The LMA008 from Labtech is a low-noise, broadband, solid-state, linear amplifier that operates over the frequency range of 2 to 6 GHz. The unit is
designed for use in military environments and incorporates integral regulation and temperature compensation.
The model YH1518 low phase noise miniature VHF OCXO from Greenray Industries can be ordered at any frequency between 110 and 250 MHz. This unit is well suited for applications such as frequency translation, LO sources, and clocking of high speed data converters and gate arrays.
The SKY73100 voltage-controlled oscillator (VCO)/synthesizer from Skyworks is a fully-integrated signal source for high dynamic range transceivers. The device provides low phase noise performance for 2G, 2.5G, and 3G base station transceivers.
The MwT-LP7 from MicroWave Technology is a low phase noise GaAs MESFET device with nominal quarter-micron gate length and 250-micron gate width.
It is suitable for oscillator applications requiring ultra-low phase noise up to 31 GHz or amplifiers requiring low residue noise in the 500 MHz to 26 GHz frequency range.
Ciao Wireless offers a line of high-performance cascadable
low frequency amplifiers for connectorized applications. Frequency coverage includes multiple models with various bands from 10 MHz to 8 GHz.
Teledyne Microwave has introduced an ultra-low phase noise YIG-tuned oscillator (YTO) in a miniaturized board-mount package that provides for continuous coverage of the 3 to 8 GHz frequency band. It is available in a TO-8B, 12-pin package, or a surface-mount package.
Terabeam provides 60 GHz low-noise and high-power amplifiers from stock to 30 day delivery. A wide variety of gain and bandwidth combinations are available to provide designers with a solution for most applications.
Tyco Electronics has developed three M/A-COM ultra low noise amplifiers that achieve less than 1 dB NF and are tunable over a wide frequency range. They are suitable for a variety of applications including GPS, WiMAX, DAB, and MoCA.
Narda Microwave-East
recently added a broad range of microwave amplifiers to its offering of standard catalog products. These amplifiers feature standard bandwidths, and octave and multi-octave bands in the .5 to 18 GHz frequency range.
The LX Series of low-cost synthesizers from EM Research is suitable for high-volume applications. These synthesizers cover the frequency range of 50 MHz to 3.6 GHz (in specific bands) and come in small 0.75" square packages.
The PEC-12-50M40G-4R0-15-SFF
ultra-broadband amplifier from Planar Electronics Technology offers 12 dB of gain while providing a low midband noise figure of 4 dB. Production units are now available.
The MLA20RPDC GPS line amplifier from GPS Networking is a one-input, one-output device with a 20 dB min. gain block in a miniaturized housing. The frequency response covers the GPS L1 and L2 bands with excellent gain flatness.
Serving a worldwide base of commercial and military clients, Precision Devices
(PDI) manufactures a wide variety of crystal oscillators in custom and SMD
packages.
These voltage-controlled oscillators (VCOs) from RFMD Multi-Market Products Group provide customers with a fully-integrated oscillator solution in a compact form factor. VCOs are available in a variety of industry-standard packages.
Designed for linear application in the 500 to 1000 MHz range, this amplifier from NP Technologies utilizes RF power MOSFET devices that provide high gain, wide dynamic range, and an excellent 3rd order intercept point.