This Newsletter Is Sponsored By:

How To Create Your Own Switching System
Dow-Key Microwave is pleased to release three new application notes describing how one can build one's own switching system by using Dow-Key CANBus switches together with an ENET or a GPIB kit. The difference between the ENET kit and the GPIB kit lies in that the translator board uses either the TCP/IP protocol or the GPIB protocol respectively to transmit data. Download the application notes here. |
|
| Featured Article | | Proprietary Wireless – For Those Times When Standards Aren't Best By Nick Hunn, Laird Technologies
Today when most designers decide they need to cut the cable and add wireless links to their products the first thing they think of is the well-known wireless standards – typically Bluetooth, Wi-Fi or ZigBee. In many cases that may be the valid choice, but it means that the advantages of proprietary wireless can be overlooked. This article explains the differences and highlights the times when designers should consider proprietary RF as a valid option for their products...
|
|
|
|
| Featured Products | Reconfigurable CANBus-Based Integrated Switch Matrix Dow-Key Microwave provides a reconfigurable CANBus-based integrated switch matrix (P/N 13D12-480822T) equipped with a built-in Ethernet port. This switch matrix is based on the standard design of the SP12T switch with internal termination. Download the product catalog for more information.
|  | Transistors Integra Technologies is an ISO 9001:2000 certified manufacturer of RF power transistors, pallets, and RF high-power amplifiers. In addition, transistor assembly and 100% functional testing is performed on-site using fully automated equipment. Request more information from Integra on its transistors.
|  | Spaceflight Microwave/RF Cable Assemblies W.L. Gore provides microwave coaxial assemblies to over 70 satellite programs. Every Gore spaceflight microwave coaxial assembly is tested, inspected, and certified to meet the acceptance requirements contained in all applicable specifications or in pre-approved customer contracts. Request more information from W.L. Gore on its cable assemblies.
|  | Capacitor Banks These three-pack capacitor banks from Evans Capacitor Company provide a completely wired and sealed assembly of three THQ3 hybrid capacitors. The capacitor bank assembly consists of the three internal THQ capacitors, soldered to a custom-designed circuit board, with all necessary balancing resistors and wiring. Request more information from Evans on its capacitor banks.
|  | EM Simulation Software CST Microwave Studio is a specialist tool for 3-D EM simulation of high-frequency devices such as antennas, filters, couplers, planar and multi-layer structures, and SI and EMC effects. Applications include mobile communication, wireless design (Bluetooth), signal integrity, and EMC. Download the product overview for more information.
|  | Microwave Printed Circuit Boards Labtech specializes in the manufacturing of high-end, time-critical microwave printed circuit boards (PCBs). Labtech provides metal-backed PTFE PCBs, single and double-sided soft PTFE PCBs, and multilayer PCBs. Download the product overview for details.
|  | Signal Generator For CATV Installation Testing The high-power output of the Merlin signal generator from Noisecom is designed to reduce costly service technician repeat calls due to intermittent cable system problems. The single-tone frequency output of the Merlin paired with a leakage detector allows the discovery of damaged cable system components. Download the product datasheet for specifics.
|  | Large Capacity Dry Wall CO2 Incubators Hotpack offers two large capacity CO2 incubator models for extensive or high-volume testing requirements. It is available with 33 cu. ft. capacity, in both refrigerated and non-refrigerated versions. Download the product brochure for details.
|  | Access Point Emergent Electronics provides an access point featuring an Intel processor. It is configurable as a bridge, router, or repeater. Download the product datasheet for more information.
|  | GPS Lumped Component Broadband Filter This filter from K&L Microwave features an ultra-low-profile package and high out-of-band attenuation through to 5.0 GHz. It is designed to provide low cost with a high "Q" response. Download the product datasheet for details.
|  | Optimization For High-Performance Electronic Design Optimetrics from Ansoft is a versatile, optional software program that adds parametric, optimization, sensitivity, and statistical analysis capabilities to HFSS, Q3D Extractor and Maxwell 3-D. Optimetrics automates the design-optimization process for high-performance electronic devices by quickly identifying optimal values for design parameters that satisfy user-specified constraints. Download the product brochure for specifics.
|  | Tunable Band Reject Filters RLC Electronics is now offering a series of tunable bandpass and tunable band reject filters. The band reject filters are available with center frequencies up to 6 GHz, tunable over a 7.5% range of the center frequency with little or no change in the bandwidth. Download the product datasheet for details.
|  | Thick-Film Process Capabilities Mini-Systems (MSI) has been providing precision, high-reliability chip resistors for more than 30 years. MSI's products are designed for solder fillets for optimum performance in the areas of stability, solderability, adhesion, power dissipation, and life. Download the product catalog for more information.
|  | LC Bandpass Filters And Duplexers/Diplexers Anatech Electronics manufactures standard and custom LC bandpass filters and duplexers/diplexers from 0.1 MHz to 20 GHz. All packages can be manufactured in different styles, suitable for the frequency range of the product. Request more information from Anatech on its bandpass filters and duplexers/diplexers.
|  | Low-Noise, Filtered, Amplified 1 X 4 GPS Antenna Splitter The LNFA1X4 low-noise, filtered, amplified GPS splitter from GPS Networking is a one-input, four-output device with 0 dB nominal gain. The device features a low-noise input section to establish an overall system noise figure. Download the product datasheet for specifics.
|  | Woven Fiberglass/PTFE Composite Materials CuClad laminates from Arlon Materials for Electronics are woven fiberglass/PTFE composite materials for use as printed circuit board substrates. Using precision control of the fiberglass/PTFE ratio, CuClad laminates offer a range of choices from the lowest dielectric constant and loss tangent to a more highly reinforced laminate with better dimensional stability. Download the product datasheet for details.
|  | Battery Simulator The single-channel model 2302 battery simulator and dual-channel model 2306 battery/charger simulator from Keithley Instruments were designed specifically for development and test applications of portable, battery-operated products. Request more information from Keithley Instruments on its battery simulator.
|  | Precision Frequency Source The Rhino 2 from Berkeley Varitronics Systems includes an internal 8-channel GPS receiver that synchronizes the 1 PPS, 1/2 PPS, and Adj PPS signals to GPS time. The battery allows the Rhino 2 to be internally powered for short periods of time. Download the product datasheet for details.
|  |
|
| Technology 101 Articles | | RF Globalnet provides its subscribers with a wide range of what we call "Technology 101" articles. These tutorials, papers, and other articles introduce you to the basics of RF, microwave, and millimeter-wave technologies and theory. You can access these articles in our Technology 101 Library.
If you are interested in submitting your own Technology 101 articles for consideration, please e-mail us at editor@rfglobalnet.com.
|
| | RF Globalnet Discussion Forums | | Do you need technical advice on your current design? Are you looking for product recommendations from your peers? Are you curious to know what the rest of the microwave/RF design community is talking about? If so, visit the
RF Globalnet Discussion Forums. |
|
|
|
|
| Featured Downloads | | Datasheet: X-Band, High-Level Amplifier Module | e2v technologies has developed a high-level, X-band amplifier module for general-purpose applications. The simple, lightweight, rigid construction with protected internal power supply enables the unit to be used economically in professional and sheltered military environments...
| | Datasheet: DC To 26.5 GHz SP2T Electromechanical Switch | Model SEM124 from Narda Microwave-East is a single-pole, double-throw electromechanical switch from Narda Microwave-East that operates from DC to 26.5 GHz with extremely low insertion loss, high isolation, and low VSWR...
| | Datasheet: Double-Balanced Mixer | | Model MC3008, the latest from Teledyne Cougar's line of high-performance, double-balanced, frequency mixers, covers RF frequencies from 1 to 3400 MHz, LO from 1 to 3400 MHz, and IF from 1 to 2000 MHz... |
|
|
| Featured Book | 
Phased-Array Radar Design: Application Of Radar Fundamentals
By Tom Jeffrey
This book is a text-reference designed for electrical engineering graduate students in colleges and universities as well as for corporate in-house training programs for radar design engineers, especially systems engineers and analysts who would like to gain hands-on, practical knowledge and skills in radar design fundamentals, advanced radar concepts, trade-offs for radar design, and radar performance analysis... |
|
| Coming Soon -- RF Globalnet's Top 10 Of 2008 | 
On December 23, RF Globalnet will deliver its fourth annual Top 10 newsletter to your inbox. This special edition will feature the most popular articles, news, downloads, and products from 2008. For a preview of what to expect, see last year's Top 10 newsletter. Then check back on December 23 for the 2008 edition.
|
|
|
| 2009 Editorial Calendar | | Our 2009 Editorial Calendar is now available! See the technologies, application areas, and industry events we will be covering in 2009.
|
|
| Advertise With RF Globalnet | | Learn how RF Globalnet can help with your company's marketing plan. Please review our media kit for more information.
|
|
|